Technical information

Deltabar M PMD55
Endress+Hauser 35
Local display (optional)
A 4-line liquid crystal display (LCD) is used for display and operation. The local display shows measured values,
dialog texts as well as fault and notice messages in plain text, thereby supporting the user at every stage of
operation. The liquid crystal display of the device can be turned in 90° stages.
Depending on the orientation of the device, this makes it easy to operate the device and read the measured
values.
Functions
• 8-digit measured value display including sign and decimal point, bar graph for 4 to 20 mA HART as current
display; or for PROFIBUS PA as graphic display of the standardized value of the AI Block; for FOUNDATION
Fieldbus as graphic display of the transducer output in relation to the set pressure range.
• Three keys for operation
• Simple and complete menu guidance as parameters are split into several levels and groups
• Each parameter is given a 3-digit ID number for easy navigation
• Possibility of configuring the display to suit individual requirements and preferences, such as language,
alternating display, contrast setting, display of other measured values such as sensor temperature etc.
• Comprehensive diagnostic functions (fault and warning message, peak-hold indicators etc.)
P01-Mxxxxxxx-07-xx-xx-en-002
E
+
–
Symbol
Operating keys
ValueDevicetag
Measured value display
Unit
Bargraph
Operating menu
Parameter with selection list
Freely editable parameter
Direct
Access
Code
Value that
can be
edited
Selection
options
Header line
Information
line
Mainline