Technical information

Deltabar M PMD55
22 Endress+Hauser
Wall and pipe-mounting
(optional)
Endress+Hauser offers a mounting bracket for installing the device on pipes or walls. A bracket with mounting
accessories for pipe mounting is included with the device.
Note!
When using a valve block, the block's dimensions must be taken into account.
P01-PMD55xxx-06-xx-xx-xx-004
Mounting bracket for wall and pipe mounting
1 Adapter plate (+ six screws and six washers)
2 Mounting bracket (+ bracket for pipe mounting and two nuts)
Please note the following when mounting:
• To prevent the mounting screws from scoring, lubricate them with a multi-purpose grease prior to mounting.
• In the case of pipe mounting, the nuts on the bracket must be tightened uniformly with a torque of at least
30 Nm (22.13 lbf ft).
Ordering information:
• See Product structure  ä 39 ff: Feature 620 "Accessory Enclosed", option PB and PC
• As Accessorry:
– Adapter plate 7/16 - 20 UNF part number: 71098632
– Adapter plate M10 part number: 71101935
– Mounting bracket and adapter plate 7/16 - 20 UNF part number: 71098630
– Mounting bracket and adapter plate M10 part number: 71101934
2
1
41.3
90
66.4
54
60
30
66.4
M10
7/16
106
74
74
124
135
37.5
54
54
41.3
41.3