Technical information

Deltabar M PMD55
Endress+Hauser 15
FOUNDATION Fieldbus
The digital communication signal is transmitted to the bus via a 2-wire connection. The bus also provides the
power supply. For further information on the network structure and grounding and for further bus system
components such as bus cables, see the relevant documentation, e.g. Operating Instructions BA00013S
"FOUNDATION Fieldbus Overview" and the FOUNDATION Fieldbus Guideline.
Cable specifications:
Use a twisted, shielded two-wire cable, preferably cable type A
Note!
For further information on the cable specifications, see Operating Instructions BA00013S "FOUNDATION
Fieldbus Overview", FOUNDATION Fieldbus Guideline and IEC 61158-2 (MBP).
Devices with valve connector
P01-xMx5xxxx-04-xx-xx-xx-005
Left: electrical connection for devices with a valve connector
Right: view of the connector at the device
Material: PA 6.6
Devices with Harting plug Han7D
P01-xMD7xxxx-04-xx-xx-xx-000
Left: electrical connection for devices with Harting plug Han7D
Right: view of the plug connector at the device
Material: CuZn
–
+
+–
+
–
Han7D
–
+
+–
–
+
1
5
4
6
7
8
2
3