Owner`s manual

Rear Panel
[4] USB
USB connector. It allows to connect the soundcard to the PC by means of an USB
cable.
Using the X2
Playing
When the USB device is connected to the computer, a new audio device will be
automatically available in the system. If some other audio devices are present (such
as a built-in soundcard on the motheboard or another soundcard), the USB audio
device can be selected as preferred audio device in Windows from Control Panel /
Multimedia properties.
Alternatively, the USB audio device can be selected, among all other soundcards, from
your audio software.
The X2 doesn't need any additional software setting to work. The sample rate is set
automatically when the recording and/or playing of a sound is started.
The standard Windows mixer can be used for adjusting the output sound level. It can
be accessed from Windows taskbar START / Programs / Accessories.
The Windows mixer can be started also by writing SNDVOL32 in the “Run” field of
Windows menu.
X2 Owner's Manual - Rev. 1.4 - page 11