Instruction Manual

Active/Standby operation

Select Active operation to adjust the display settings that apply when

Twilight is switched on, or Standby operation to adjust the display

settings that apply when Twilight is in standby.

Brightness

By default, the display brightness is set to ‘Automatic’, which means

that the brightness adjusts to suit the light level around your radio. If

you want to change this setting, Tap

Manual and use the +/- buttons

to adjust the brightness from 1 (low) to 10 (high). Push Select to

conﬁrm, or tap OK. You can switch back to automatic brightness by

tapping Automatic.

Screen duration

The length of time the display stays illuminated after a button is

pressed or context-sensitive button is tapped. Choose between

Always on (default) or Off after 7 seconds.