Instruction Manual

PURE Sounds Select a sound to wake up to.

FM Plays the last FM station tuned to.

Tone Sounds a beeping tone.

6. Set the alarm volume (radio and PURE Sounds alarms only).

7. Set the Lamp time. Lamp time is the length of time the lamp will take

to reach full brightness before the alarm sounds (from No lamp to

1 hour). For example, setting a lamp time of 30 minutes means the

lamp will switch on and slowly get brighter in the 30 minutes before

the alarm sounds.

8. Tap

Save, the icon in the icon bar indicates a set alarm. Alarm

time(s) are also displayed on-screen in standby. An outlined icon

means it is set to skip once.

Snoozing or cancelling a sounding alarm

Snooze an alarm by touching the top of the lamp or tapping Snooze.

The alarm will sound again in nine minutes by default. A snoozed alarm

is indicated in standby by an animated ‘Z’. (See page 19 for snooze

options.) To cancel a sounding or snoozed alarm, press Standby.

Alarm1 set lamp

– No lamp –

10 minutes

No lamp

5 minutes

07:40