Warranty information Imagination Technologies Ltd. warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of two years from the date of purchase. This guarantee covers breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not authorised by us. Please return your warranty card or visit www.pure.
Controls and Connectors Front panel Autotune – press and hold for around two seconds to scan the full range of digital frequencies in Band III. Press and release to scan UK only Band III.
Quick start This section provides information on how to set up and start using your radio. 1 2 Press the Standby button to switch the unit on. The screen lights up and a progress bar indicates the progress of an autotune to find the stations available. If you live outside the UK this local autotune may find very few or no stations. If no stations you see the message ‘No stations available’ and you see a menu of options. Use the Tune knob to scroll through and select the ‘Autotune full’ option.
Using your TEMPUS-1XT Setting alarms TEMPUS-1XT has three alarms which switch TEMPUS-1XT on (if in standby mode) and tune to the station you have chosen or sound a tone. To set or change an alarm: 1. Press the Menu button and push the Tune knob to select the Alarm settings option. 2. Turn the Tune knob to view Alarm 1/2/3 settings and push if you want to change that alarm. 3. Turn the Tune knob to scroll through the following settings and push to change any of them.
Cancelling alarms When a radio or tone alarm goes off you have three options: Snooze Tap the SnoozeHandle to snooze the alarm for the period set (the default is 8 minutes). The radio or tone mutes and you see the snooze icon on the screen. The alarm will repeat when the snooze period has elapsed. You can repeat the snooze as many times as you want up to 60 minutes after the last snooze. The alarm will automatically turn off after 60 minutes. To cancel the snooze push the Tune button.
Recording from your TEMPUS-1XT You can record from your TEMPUS-1XT using the Stereo Out or Digital Out sockets. You can also set a record timer to automatically switch your unit on and tune to a particular station at a time of your choosing – this may be useful if you have a MiniDisc recorder or similar with a synchro-record facility and you use the Digital Out socket. You cannot record one station and listen to another at the same time.
Setup options Press the Menu button, turn the Tune knob and push to select one of the following setup options. Station order Changes the order in which stations appear as you scroll through the station list. Turn the Tune knob to scroll through the following options and push to select one: Alphanumeric Displays all stations in alphanumeric order. Fav station Displays your most listened to stations at the top of the station list and the rest below, in alphanumeric order.
Audio settings Digital output The Digital Output setting controls the Digital Out socket on the rear of your radio. Select one of the following options: On - if you want continuous output to an amplifier or recorder. Off/Timer - if you want to connect to a recorder with a synchro-record feature. DRC value DRC (Dynamic Range Control) value makes the quieter sounds in a broadcast easier to hear. The DRC level of a broadcast is set by the station and sent with the signal.
Hints and tips This section provides information on advanced DAB features and offers advice if you are having problems with your radio. (‹‹/››) Secondary services Secondary services accompany some stations, providing extra information or alternative content and may only be broadcast at certain times. At the time of writing not many secondary services are available.
Resetting your radio Resetting your radio removes all presets, stored stations and favourite station settings and resets all options to defaults. To select the reset option: To select the reset option: 1. Press and hold the Menu button for more than two seconds. The display will show ‘Press Tune to confirm reset’. Release the Menu button. 2. Push the Tune knob to confirm the reset or press no buttons to cancel the reset.
www.pure.com PURE Digital, Imagination Technologies Ltd., Imagination House, Home Park Estate, Kings Langley, Herts, WD4 8LZ, UK +44 (0)1923 277477 support +44 (0)1923 277488 sales 12L20 +44 (0)1923 270188 support@pure.com sales@pure.
