Installation manual
Table Of Contents
- Table of Contents
- 1 System Outline
- 2 Activation Key Installation
- 3 Installation
- 3.1 Before Installation
- 3.2 Installation of the PBX
- 3.2.1 Unpacking
- 3.2.2 Names and Locations
- 3.2.3 Opening/Closing the Front Cover
- 3.2.4 Attaching Fan Guards
- 3.2.5 Installation of Basic System or 2-shelf System (Floor Standing)
- 3.2.6 Installation of 3- or 4-shelf System (Tower Type)
- 3.2.7 Installation of 4-shelf System (Side-by-side Type)
- 3.2.8 Wall Mounting (KX-TDE600/KX-TDE620)
- 3.2.9 Installing/Replacing the Power Supply Unit
- 3.2.10 Frame Ground Connection
- 3.2.11 Installing/Removing the Optional Service Cards
- 3.2.12 Cable Handling
- 3.2.13 Types of Connectors
- 3.2.14 Attaching a Ferrite Core
- 3.2.15 Fastening Amphenol Connector
- 3.2.16 Surge Protector Installation
- 3.3 Information about the Main Processing Card
- 3.4 Information about the Virtual Cards
- 3.5 Information about the Optional Shelf Expansion Cards
- 3.6 Information about the Built-in Shelf Expansion Card
- 3.7 Information about the CO Line Cards
- 3.8 Information about the Extension Cards
- 3.8.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144)
- 3.8.2 DHLC8 Card (KX-TDA0170)
- 3.8.3 DLC8 Card (KX-TDA0171)
- 3.8.4 DLC16 Card (KX-TDA0172)
- 3.8.5 SLC8 Card (KX-TDA0173)
- 3.8.6 EXT-CID Card (KX-TDA0168)
- 3.8.7 CSLC16 Card (KX-TDA0177), ESLC16 Card (KX-TDA6174), EMSLC16 Card (KX-TDA6175), and ECSLC24 Card (KX-TDA6178)
- 3.8.8 IP-EXT16 Card (KX-TDA0470)
- 3.9 Information about the Other Cards
- 3.10 Connection of Extensions
- 3.11 Connection of Doorphones, Door Openers, External Sensors, and External Relays
- 3.12 Connection of Peripherals
- 3.13 LAN Connection
- 3.14 Power Failure Connections
- 3.15 Starting the PBX
- 4 Guide for the Maintenance Console
- 5 Troubleshooting
- 6 Appendix
- Index
Category Model No. Description
Proprietary Equipment KX-A258 Blank Slot Cover
KX-T30865 Doorphone
KX-T7765
KX-T7775
*1
Note that the types of activation keys are subject to change without notice. For CA activation keys, refer to the documentation for
CA.
Unsupported Optional Equipment
Most optional equipment supported by the KX-TDA100/KX-TDA200/KX-TDA600/KX-TDE100/KX-TDE200 can
also be used with the KX-TDE600. However, the items listed below are not supported by the KX-TDE600.
Category
Model No. Description
MPR Optional Cards KX-TDA0105 Memory Expansion Card (MEC)
KX-TDA6105 Memory Expansion Card (EMEC)
CO Line Cards KX-TDA0180 8-Port Analog Trunk Card (LCOT8)
KX-TDA0181 16-Port Analog Trunk Card (LCOT16)
KX-TDA0183 4-Port Analog Trunk Card (LCOT4)
KX-TDA0480 4-Channel VoIP Gateway Card (IP-GW4)
Extension Cards KX-TDA0174 16-Port Single Line Telephone Extension Card (SLC16)
KX-TDA0175 16-Port Single Line Telephone Extension with Message
Lamp Card (MSLC16)
Other Cards KX-TDA0166 16-Channel Echo Canceller Card (ECHO16)
KX-TDA0410 CTI Link Card (CTI-LINK)
Optional SD Memory
Cards
KX-TDA0920 SD Memory Card for Software Upgrade to Enhanced
Version
KX-TDA6920
Activation Key Code KX-NCS4910 Activation Key for Software Upgrade to Enhanced
Version (Software Upgrade 01)
PSU KX-TDA0108 S-Type Power Supply Unit (PSU-S)
Equipment Compatibility
Compatible Panasonic Proprietary Telephones
The PBX supports the following telephones:
• IP proprietary telephones (e.g., KX-NT300 series)
• IP softphones (e.g., KX-TDA0350)
• Digital proprietary telephones (e.g., KX-DT300 series)
• Analog proprietary telephones (e.g., KX-T7700 series)
• Portable stations (e.g., KX-TD7690)
• DSS consoles (e.g., KX-DT390)
Document Version 2009-12 Installation Manual 5
System Components