Installation manual
Table Of Contents
- Table of Contents
- 1 System Outline
- 2 Activation Key Installation
- 3 Installation
- 3.1 Before Installation
- 3.2 Installation of the PBX
- 3.2.1 Unpacking
- 3.2.2 Names and Locations
- 3.2.3 Opening/Closing the Front Cover
- 3.2.4 Attaching Fan Guards
- 3.2.5 Installation of Basic System or 2-shelf System (Floor Standing)
- 3.2.6 Installation of 3- or 4-shelf System (Tower Type)
- 3.2.7 Installation of 4-shelf System (Side-by-side Type)
- 3.2.8 Wall Mounting (KX-TDE600/KX-TDE620)
- 3.2.9 Installing/Replacing the Power Supply Unit
- 3.2.10 Frame Ground Connection
- 3.2.11 Installing/Removing the Optional Service Cards
- 3.2.12 Cable Handling
- 3.2.13 Types of Connectors
- 3.2.14 Attaching a Ferrite Core
- 3.2.15 Fastening Amphenol Connector
- 3.2.16 Surge Protector Installation
- 3.3 Information about the Main Processing Card
- 3.4 Information about the Virtual Cards
- 3.5 Information about the Optional Shelf Expansion Cards
- 3.6 Information about the Built-in Shelf Expansion Card
- 3.7 Information about the CO Line Cards
- 3.8 Information about the Extension Cards
- 3.8.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144)
- 3.8.2 DHLC8 Card (KX-TDA0170)
- 3.8.3 DLC8 Card (KX-TDA0171)
- 3.8.4 DLC16 Card (KX-TDA0172)
- 3.8.5 SLC8 Card (KX-TDA0173)
- 3.8.6 EXT-CID Card (KX-TDA0168)
- 3.8.7 CSLC16 Card (KX-TDA0177), ESLC16 Card (KX-TDA6174), EMSLC16 Card (KX-TDA6175), and ECSLC24 Card (KX-TDA6178)
- 3.8.8 IP-EXT16 Card (KX-TDA0470)
- 3.9 Information about the Other Cards
- 3.10 Connection of Extensions
- 3.11 Connection of Doorphones, Door Openers, External Sensors, and External Relays
- 3.12 Connection of Peripherals
- 3.13 LAN Connection
- 3.14 Power Failure Connections
- 3.15 Starting the PBX
- 4 Guide for the Maintenance Console
- 5 Troubleshooting
- 6 Appendix
- Index
Item Description
5 Sub Code The 6-digit sub code of the relevant hardware (WXYYZZ).
• W: Shelf type
– Physical shelf: " " (blank)
– Virtual shelf: "*" (asterisk)
• X: Shelf number
– 1: Basic Shelf
– 2: Expansion Shelf 1
– 3: Expansion Shelf 2
– 4: Expansion Shelf 3
• YY: Slot number
– Basic Shelf: 00 to 10
(00: IPCEMPR Card Slot/Built-in ESVM card; 01 to 10:
Free Slots)
– Expansion Shelf: 01 to 12
(01 to 11: Free Slots; 12: BUS-S Card Slot)
– Virtual Shelf: 01 to 08
(01 to 04: Virtual CO Line Slots, 05 to 08: Virtual
Extension Slots)
• ZZ: Port number
– For optional service cards except OPB3 card:
Port number (01 to 16) will be displayed.
– For OPB3 card:
Sub slot number (1 to 3) + port number (1 to 4) will be
displayed as follows.
• Sub slot 1 of OPB3: 11 to 14
• Sub slot 2 of OPB3: 21 to 24
• Sub slot 3 of OPB3: 31 to 34
Note
When there is no parameter for slot and physical port
number (neither for Basic Shelf nor Expansion Shelf), YY
and ZZ will be displayed as "00".
Example: Sub code for IPCEMPR card =" 10000"
6 Error Message A description of the error.
7 Log Information Displays probable causes of the errors and their solutions.
220 Installation Manual Document Version 2009-12
5.1.5 Troubleshooting by Error Log