Installation manual
Table Of Contents
- Table of Contents
- 1 System Outline
- 2 Activation Key Installation
- 3 Installation
- 3.1 Before Installation
- 3.2 Installation of the PBX
- 3.2.1 Unpacking
- 3.2.2 Names and Locations
- 3.2.3 Opening/Closing the Front Cover
- 3.2.4 Attaching Fan Guards
- 3.2.5 Installation of Basic System or 2-shelf System (Floor Standing)
- 3.2.6 Installation of 3- or 4-shelf System (Tower Type)
- 3.2.7 Installation of 4-shelf System (Side-by-side Type)
- 3.2.8 Wall Mounting (KX-TDE600/KX-TDE620)
- 3.2.9 Installing/Replacing the Power Supply Unit
- 3.2.10 Frame Ground Connection
- 3.2.11 Installing/Removing the Optional Service Cards
- 3.2.12 Cable Handling
- 3.2.13 Types of Connectors
- 3.2.14 Attaching a Ferrite Core
- 3.2.15 Fastening Amphenol Connector
- 3.2.16 Surge Protector Installation
- 3.3 Information about the Main Processing Card
- 3.4 Information about the Virtual Cards
- 3.5 Information about the Optional Shelf Expansion Cards
- 3.6 Information about the Built-in Shelf Expansion Card
- 3.7 Information about the CO Line Cards
- 3.8 Information about the Extension Cards
- 3.8.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144)
- 3.8.2 DHLC8 Card (KX-TDA0170)
- 3.8.3 DLC8 Card (KX-TDA0171)
- 3.8.4 DLC16 Card (KX-TDA0172)
- 3.8.5 SLC8 Card (KX-TDA0173)
- 3.8.6 EXT-CID Card (KX-TDA0168)
- 3.8.7 CSLC16 Card (KX-TDA0177), ESLC16 Card (KX-TDA6174), EMSLC16 Card (KX-TDA6175), and ECSLC24 Card (KX-TDA6178)
- 3.8.8 IP-EXT16 Card (KX-TDA0470)
- 3.9 Information about the Other Cards
- 3.10 Connection of Extensions
- 3.11 Connection of Doorphones, Door Openers, External Sensors, and External Relays
- 3.12 Connection of Peripherals
- 3.13 LAN Connection
- 3.14 Power Failure Connections
- 3.15 Starting the PBX
- 4 Guide for the Maintenance Console
- 5 Troubleshooting
- 6 Appendix
- Index
3.3.2 DSP16 Card (KX-TDE0110) and DSP64 Card (KX-TDE0111)
Function
DSP16: 16-channel digital signal processor card with a 4-Channel IP Trunk activation key and a
8-Channel IP Proprietary Telephone activation key preinstalled. Compliant with ITU-T G.
729A and G.711 codec methods. To be mounted on the IPCEMPR card.
DSP64: 64-channel digital signal processor card with four 4-Channel IP Trunk activation keys and
four 8-Channel IP Proprietary Telephone activation keys preinstalled. Compliant with
ITU-T G.729A and G.711 codec methods. To be mounted on the IPCEMPR card.
DSP16 Card/
DSP64 Card
Screw
inside
Accessories and User-supplied Items
Accessories (included): Screws ´ 3
User-supplied (not included): none
Note
• Depending on the number and the type of IP CO lines and IP telephones you wish to use, required
activation keys are determined, and either the DSP16 or DSP64 card is selected to be installed.
• If the preinstalled activation keys on the DSP16 or DSP64 cards are not enough for the desired
configuration, you need to purchase activation key codes. For details about the activation keys, refer
to "2.1 Information about the Activation Keys".
132 Installation Manual Document Version 2009-12
3.3.2 DSP16 Card (KX-TDE0110) and DSP64 Card (KX-TDE0111)