Installation manual
Table Of Contents
- Table of Contents
- 1 System Outline
- 2 Activation Key Installation
- 3 Installation
- 3.1 Before Installation
- 3.2 Installation of the PBX
- 3.2.1 Unpacking
- 3.2.2 Names and Locations
- 3.2.3 Opening/Closing the Front Cover
- 3.2.4 Attaching Fan Guards
- 3.2.5 Installation of Basic System or 2-shelf System (Floor Standing)
- 3.2.6 Installation of 3- or 4-shelf System (Tower Type)
- 3.2.7 Installation of 4-shelf System (Side-by-side Type)
- 3.2.8 Wall Mounting (KX-TDE600/KX-TDE620)
- 3.2.9 Installing/Replacing the Power Supply Unit
- 3.2.10 Frame Ground Connection
- 3.2.11 Installing/Removing the Optional Service Cards
- 3.2.12 Cable Handling
- 3.2.13 Types of Connectors
- 3.2.14 Attaching a Ferrite Core
- 3.2.15 Fastening Amphenol Connector
- 3.2.16 Surge Protector Installation
- 3.3 Information about the Main Processing Card
- 3.4 Information about the Virtual Cards
- 3.5 Information about the Optional Shelf Expansion Cards
- 3.6 Information about the Built-in Shelf Expansion Card
- 3.7 Information about the CO Line Cards
- 3.8 Information about the Extension Cards
- 3.8.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144)
- 3.8.2 DHLC8 Card (KX-TDA0170)
- 3.8.3 DLC8 Card (KX-TDA0171)
- 3.8.4 DLC16 Card (KX-TDA0172)
- 3.8.5 SLC8 Card (KX-TDA0173)
- 3.8.6 EXT-CID Card (KX-TDA0168)
- 3.8.7 CSLC16 Card (KX-TDA0177), ESLC16 Card (KX-TDA6174), EMSLC16 Card (KX-TDA6175), and ECSLC24 Card (KX-TDA6178)
- 3.8.8 IP-EXT16 Card (KX-TDA0470)
- 3.9 Information about the Other Cards
- 3.10 Connection of Extensions
- 3.11 Connection of Doorphones, Door Openers, External Sensors, and External Relays
- 3.12 Connection of Peripherals
- 3.13 LAN Connection
- 3.14 Power Failure Connections
- 3.15 Starting the PBX
- 4 Guide for the Maintenance Console
- 5 Troubleshooting
- 6 Appendix
- Index
3.3 Information about the Main Processing Card
3.3.1 IPCEMPR Card
Function
The IPCEMPR card is the preinstalled main processing card with built-in ESVM card feature (2-channel) and
an Activation Key for CA Basic for 20 Users. The Virtual Cards (CO line/extension) can be installed in Virtual
Slots of the IPCEMPR card and can be activated with the activation keys. Also, the IPCEMPR supports LAN
connection so that IP telephones (IP-PTs, IP softphones, SIP Extensions) and PCs can be connected on a
private IP network.
Mountable Cards
• Either one of the DSP16 or DSP64 cards (refer to "3.3.2 DSP16 Card (KX-TDE0110) and DSP64 Card
(KX-TDE0111)" )
• IPCMEC card (refer to "3.3.3 IPCMEC Card (KX-TDE0105)" )
• RMT card (refer to "3.3.4 RMT Card (KX-TDA0196)" )
SD
CARD
2
SD
CARD
4
5
SD
CARD
3
1
LEDs
SD Memory Card Slot
Cover
Reset Button
System Initialize Switch
BGM/MOH
Pager
MPR ID Number
MNT Port
LAN Port
To LAN
MNT Port
LAN Port
To PC
SD
Memory
Card
LEDs
Document Version 2009-12 Installation Manual 129
3.3.1 IPCEMPR Card