Manual

6
Adjusting and muting the volume
Turn the Volume dial or press the Volume buttons on the remote to increase or decrease the volume.
Press the Volume dial to mute.
Changing source
Use the Source button to choose between digital radio, FM radio, Auxiliary device (a separate device such
as an MP3 player connected to the Aux In socket) or Bluetooth.
Volume
Volume
FM radio
Muted
BBC Radio 2
Auxiliary Input
Volume
Changing the information shown on screen
You can change the information that is displayed on screen. To change the information that is displayed on
screen:
1. Press Menu.
2. Turn and press the Select dial to select ‘Information’.
3. Turn and press the Select dial to select one of the following options:
Scrolling text Information broadcast by most digital stations and some FM radio (RDS)
stations.
Clock Displays the time (and an alarm indicator if the alarm is set).
Signal strength Displays signal strength.
Battery information Displays a charging or power remaining indicator for a ChargePAK F1
rechargeable battery pack (available separately).
OR
BBC Radio 6Music
charging
BBC Radio 6Music
50%
Charging indicator
(when receiving mains power)
Charge remaining
(when powered by a ChargePAK)
Switching between Sleep, Standby and On
Evoke has three power modes, Standby, Sleep and On. In Standby, Evoke uses minimal power and
displays the clock. In Sleep mode, Evoke is ready to stream music using Bluetooth. See page 11 for
more information.
To enter Sleep mode, press Standby.
To enter Standby mode, press and hold Standby.
Once in Sleep/Standby mode, press Standby to switch to On.
Note: If you press the Standby button and Evoke is being powered by the ChargePAK F1, Evoke will
power off and not enter Sleep or Standby mode.
EVOKE_D4_Mio_Bluetooth_v2_UKAus.indb 6 8/15/2014 9:47:46 AM