Operation Manual

15
PM
DR
Backlight
Always on
To change the backlight options:
1. Press Menu and turn and press the Select
dial to choose ‘Display settings’.
2. Now choose either ‘Active’ to change the
settings that apply when the unit is switched
on, or ‘Standby’ to change the settings that
apply in standby.
Changing the backlight time-out duration
Press Menu and turn and press the Select dial
to choose ‘Duration’. Choose from the following
two modes:
Always on: The backlight is always set to
your preferred brightness level.
Timed off: The backlight is set to your
preferred brightness level when a button
is pressed and then switches off after 7
seconds of inactivity.
Changing your preferred brightness level
Press Menu and turn and press the Select
dial to choose ‘Level’ and set a brightness level
between 1 (dim) and 5 (bright).
Display settings
PM
DR
Information
Sig. quality
Backlight
You can adjust the brightness and time-out duration of the backlight
for when the unit is switched on and in standby.
Information
You can choose the information shown on the display.
1. Press Menu and turn and press the Select
dial to choose ‘Information’.
2. Turn and press the Select dial to choose
one of the following options:
Scrolling text: Provided by the broadcaster.
Signal strength: The clear block indicates
reliable reception level.
Date: Displays the current date.
Signal quality: (Digital radio only) From 0
(low) to 100 (high).
PM
DR
Display
Backlight