Operation Manual

14
FM settings
FM stereo option
You can choose between ‘Stereo’ or ‘Mono’ reception when listening to
FM radio. You may want to choose Stereo if listening using headphones.
Note: The FM stereo option is only available when you have selected
‘FM’ as the radio source.
To change between Stereo or Mono reception:
1. Press Menu.
2. Turn and press the Select dial to choose
‘FM stereo’.
3. Turn and press the Select dial to choose
between ‘Stereo’ or ‘Mono’ FM reception.
FM tuning mode
Press Menu and turn and press the Select dial to choose ‘FM Tuning
Mode’. Choose from the following two modes:
DRFM
PM
Digital radio settings
Autotune
You can use the autotune function to automatically scan for new digital
radio stations and remove inactive ones.
Note: Autotune is only available when you have selected ‘Digital’ as the
radio source.
To carry out an autotune:
1. Press Menu.
2. Turn and press the Select dial to choose
‘Autotune’. The number of stations found
will be displayed during the autotune.
When the autotune has finished, Evoke will tune
to the last station that you were listening to.
Scanning... 12
PM
DR
the latest news
BBC Radio 2
PM
DR
Seek: When you turn the Select dial, the
radio tunes to the next station with a good
signal.
Manual: When you turn the Select dial,
the radio tunes up or down the FM radio
frequency range by 0.05 MHz.
FM tuning mode
Seek
DRFM
PM
FM stereo
Stereo