Pure Warranty Statement for Australia This statement replaces any reference to warranty which may be contained elsewhere within this manual. What do you need to do now? Option 1: You can register your purchase on-line at https://www.pure.com/au/ register/register.asp Option 2: Or you can do nothing other than keep your proof of purchase as evidence of your purchase date. This proof of purchase would need to be presented if warranty service was ever required.
Thank you for choosing Evoke D2. This manual will help you get your product up and running in no time and explains how to get the best out of all its great features. If you need any further assistance, please visit the support pages on our website at www.pure.com.
Safety information 1. Keep the unit away from heat sources such as radiators, heaters or other appliances that produce heat. 2. Do not expose the unit to direct sunlight. 3. Do not use the unit near water. 4. Avoid objects or liquids getting into the unit. 5. Do not remove screws from or open the unit casing. 6. Fit the mains adaptor to an easily accessible socket, located near the radio and ONLY use the mains power adapter supplied. 7.
Contents 4 Getting started 4 5 6 7 Quick set up Controls Rear panel Display 8 Using your Evoke 8 8 8 Selecting digital radio Selecting FM radio Pausing and controlling scrolling text 10 Storing and selecting presets 10 To quick-store a station to a preset button (1–3) 10 To store a station to the preset list (1–10) 10 To recall a preset when listening to digital radio or FM radio 11 Setting the alarm and sleep timer 11 12 12 12 12 Setting the alarm Cancelling a sounding alarm Snoozing a sounding a
Getting started Quick set up Note: If you have a ChargePAK B1 rechargeable battery (sold separately) fit it now before plugging Evoke in. See page 18 for more information. 1 Unclip the aerial and fully extend it (steps A and B). 2 • Insert the jack of the supplied mains adapter into the socket on the rear of the radio (C). • Plug the mains adapter into the mains supply (D). 3 Wait for the radio to complete an Autotune for all available stations.
Controls No. Item Description 1 Standby On/standby switch (mains powered) or on/off switch (ChargePAK powered). 2 Source Press to switch between Digital radio, FM radio and Auxiliary input. 3 Menu Press to access setup options. 4 Volume Turn to adjust volume. Push to mute and un-mute. 5 Select Turn and press to browse and select radio stations (see page 8), select and adjust menu options or pause and control scrolling text (see page 8).
Rear panel 6 1. 5.5V DC input connection for supplied mains adapter. 2. 3.5mm stereo headphone socket. 3. 3.5mm auxiliary input connection for an iPod, MP3 player, etc. 4. Mini-B type USB connector for USB software updates. 5. Compartment for ChargePAK B1 rechargeable battery (sold separately). 6. Telescopic antenna.
Display DR PM BBC Radio 2 the latest news 1. Displays station name. 2. Displays date, scrolling text, settings and station information (see page 15). 3. Signal strength. 4. Alarm set indicator (see page 11). 5. Alarm snooze indicator (see page 12). 6. Sleep and kitchen timer indicator (see page 12). 7. AM/PM indicator. 8. Current time. 9. ChargePAK indicator. 10. Source indicator. 11. Volume/mute indicator.
Using your Evoke PM DR Selecting digital radio PM DR BBC Radio 2 the latest news BBC Radio 2 the latest news Changing digital stations PM DR Press Source until ‘DR’ is displayed at the top of the screen. 1. Turn the Select dial to the station you want to listen to. BBC Radio 2 BBC 6Music 2. Push the Select dial to tune into the station. PM DRFM DRFM PM Selecting FM radio 87.50MHz 87.50MHz DRFM PM 87.60MHz Turn to seek DRFM PM 87.
PM DRFMAUX the auxiliary input Auxiliary Using 1. input Connect the line out or headphone socket your auxiliary device to the Aux In 08-03-2013 ofsocket on your Evoke using a suitable DRFMAUX PM Auxiliary input 08-03-2013 cable. 2. Press Source until ‘AUX’ is displayed at the top of the screen. 3. The Auxiliary input screen will display and Evoke will play any audio that is playing on the auxiliary device.
Storing and selecting presets Store up to 10 digital and 10 FM radio stations for quick access. DR PM BBC Radio 2 the latest news DR PM BBC Radio 2 Preset 2 saved DR PM Empty preset Preset 02 To quick-store a station to a preset button (1–3) Tune to the digital or FM radio station you want to store. Press and hold one of the numbered preset buttons (1–3) for two seconds to save the current station as a preset. You can save over existing presets. To store a station to the preset list (1–10) 1.
Setting the alarm and sleep timer The alarm in Evoke switches the radio on (if in standby) and tunes to a digital or FM radio station or sounds a tone. Note: The alarm function does not work when Evoke is being powered by the ChargePAK B1. Setting the alarm 1. Press Menu. 2. Turn and press the Select dial to choose ‘Alarm’. PM DRFM FM Alarm 3. Turn and press the Select dial to choose ‘On’. 4. Turn and press the Select dial to set the hour for the alarm. Repeat to set the minutes for the alarm. 5.
Cancelling a sounding alarm To cancel a sounding alarm, press either the 3, 4+, Menu or Source button, or push the Select dial. If you press the Standby button during a sounding alarm, Evoke will enter standby. Snoozing a sounding alarm To snooze a sounding alarm, press either the Preset number 1 or Preset number 2 button. Disabling an alarm Press Menu. Turn and press the Select dial to choose ‘Alarm’. Turn and press the Select dial to choose ‘Off’. The alarm icon on the display will disappear. 1. 2. 3.
Options and settings General settings DR PM Language English DR PM Settings Factory reset DR Settings Version PM Changing the language 1. Press Menu. 2. Turn and press the Select dial to choose ‘Settings’. 3. Turn and press the Select dial to choose ‘Language’. 4. Turn and press the Select dial to select a menu language from ‘English’, ‘French’, ‘German’, ‘Italian’ or ’Spanish’.
Digital radio settings Autotune You can use the autotune function to automatically scan for new digital radio stations and remove inactive ones. Note: Autotune is only available when you have selected ‘Digital’ as the radio source. DR DR To carry out an autotune: PM Scanning... 12 PM BBC Radio 2 the latest news 1. Press Menu. 2. Turn and press the Select dial to choose ‘Autotune’. The number of stations found will be displayed during the autotune.
Display settings Backlight You can adjust the brightness and time-out duration of the backlight for when the unit is switched on and in standby. DR PM Display Backlight To change the backlight options: 1. Press Menu and turn and press the Select dial to choose ‘Display settings’. 2. Now choose either ‘Active’ to change the settings that apply when the unit is switched on, or ‘Standby’ to change the settings that apply in standby.
Clock settings DR PM Clock Set Time/Date DR PM Clock Saved Setting the time and date The time and date on Evoke are automatically set by the FM or digital radio signal. If the time/date does not update automatically, you can manually set it using this option. Note: Any time or date updates received by an FM or a digital broadcast will override manual settings, if clock synchronisation is enabled (see the following page for more information). Setting the time and date manually 1. Press Menu. 2.
PM DR Time (12h/24h) 24 hour PM DR Set date forma DD-MM-YYYY DR PM Clock synch DAB and FM Changing the time format 1. Press Menu. 2. Turn and press the Select dial to choose ‘Clock’. 3. Turn and press the Select dial to choose ‘Set 12/24 hour’. Repeat to set the required time format. Changing the date format 1. Press Menu. 2. Turn and press the Select dial to choose ‘Clock’. 3. Turn and press the Select dial to choose ‘Set date format’. Repeat to set the required date format.
Installing the ChargePAK B1 1. Switch Evoke off and disconnect from the mains power supply. 2. Open the battery compartment. 3. Insert the ChargePAK connector plug into the socket in the compartment. Line up the ridges on the plug with the slots in the socket to ensure correct orientation. Do not force the plug. 4. Insert ChargePAK into the battery compartment, logo side out. ChargePAK B1 5. Replace the battery cover and connect Evoke to the mains. 6. ChargePAK will begin charging.
Technical specifications Radio Digital and FM, UK products receive DAB and FM; non-UK products receive DAB/DAB+/ DMB-Radio/FM depending on region. Audio 1.6W RMS. Full-range 3” drive unit. Input Connectors 5.5V DC power adaptor socket (230V supplied), Mini USB connector for product updates, 3.5mm Line-in for auxiliary devices Output Connectors 3.5mm stereo headphone socket. Power 230V AC to 5.5V (1.0A) DC external power adapter or optional ChargePAK B1. Power Consumption Standby: 0.
Warranty information Imagination Technologies Limited warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of two years from the date of purchase. This guarantee covers breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not authorised by us.
www.pure.com connect.pure.com www.facebook.com/pure Pure Imagination Technologies Limited Home Park Estate Kings Langley Herts, WD4 8LZ United Kingdom http://support.pure.com Pure Australasia Pty Ltd PO Box 5049 Wonga Park Victoria 3115 Australia sales.au@pure.com http://support.pure.
