Specifications

Switching on and off
Before switching on for the first time, check all connections, extend your aerial fully and ensure that the volume is
turned down.
Push and release the Power button to switch the unit on or off. The LCD screen will light up when the unit is on.
Using your EVOKE-1
This section provides information on using your EVOKE-1 including tuning, selecting a station and altering the displayed information.
Tuning
Tuning the EVOKE-1 is very simple. When you first switch on the unit it will start an automatic tuning process described
below in Tuning for the first time. You may want to re-tune the unit at a later date if you move the unit to a different
room or if you want to receive a newly introduced multiplex – see Retuning your unit on page 8.
Tuning for the first time
When you switch on your EVOKE-1 for the first time an autotune process will be performed automatically. A progress
indicator on the display shows that autotune is underway.
If stations are found during the autotune
The stations will be stored in alphanumeric order. The first station on the list will be selected and you will hear it through
the speaker. To listen to other stations, see Selecting a station on page 9.
If no stations are found during the autotune
‘No stations available’ will be shown on the display for a few seconds and then you see a menu of options.
Use the Tune knob to scroll through the following options and push it to select that option.
7