Specifications

Model #: PT500

TABLE OF CONTENTS

To Get Started:

1. Carefully open the top of the box.

2. Remove box from the bottom lid and remove chair. The back rest for the

chair will be folded forward .

3. Open the chair up by carefully pulling the lever under the back of the chair;

make sure the back rest and foot rest are free of hands and/or other foreign

objects.

4. Attach back rest with zipper and head rest with the Velcro

5. Plug power supply cord into a grounded, surge protecting power bar.

6. Make sure that there is enough room for the chair to fully recline to the

horizontal position without any obstacles in the way.

7. Turn power switch on the back left of the chair to the ON position.

GETTING STARTED

GETTING STARTING

MOVING AND LIFTING

→

Raise the Leg rest

Roll on the wheels

Make sure chair is

unplugged

Lifting the Chair

1. Ask another person to assist you.

2. Have one person lift the leg rest and another lift by the

back of the chair. Be sure to lift with your legs and not

your back.

3. Lift carefully to avoid dropping the chair or causing

injury.

Moving the Chair

1. Make sure the master power switch is o (located at the

back of the chair) position and unplugged with the cord

safely out of the way.

2. Make sure no objects are in the way or resting on or

around the chair.

3. Pull the lever located on the bottom of the chair at the

back and fold the back rest inward.

3. Lift the foot rest so that the chair is resting on the wheels

on the back of the chair.

4. Push or pull the chair to where you would like it to be

moved.

5. Do not use back rest, seat or cord to move the chair.

PT300Manual 8x10.indd 5 12/12/2009 4:10:53 PM