Specifications

POWER FILTER
SPP0108
Mains Power Filter
ON/OFF 2 pole Switch
Possibility to swivel at 90° for easier installation
8 filtered switched sockets : the power is present when the switch is ON
Mains power protection : 450 Joules
Phone/Fax/Modem RJ11 protection
terrestrial antenna protection
Red power indicator : Once the SPP0108 is switched ON, indicates the power is present
on the sockets
Green surge indicator : when lit, indicates the protection circuits are operational
Ref. SPP0108
This equipment must be connected to a properly grounded socket.
Electrical specifications :
Power rating : 250VAC, 50-60Hz, 16A max
EMI/RFI Filtering : Up to 35dB from 500kHz to 30MHz
Protection Mode : Full 3 lines (L-N, L-PE, N-PE)
Maximum energy dissipation : 450 Joules
Response Time : < 1 nanosecond
Max. Spike current : 4500 A
Max. Spike voltage: 6000 V
Max. Clamping voltage : 775V
MAIN POWER PURIFICATION
The audio/video equipments are very sensitive to the AC power pollution because of their capacity to use and
amplify very low signals. The best would be to have several clean and independent power sources in order
to supply the equipments separately. The Real Cable Streamline series purification systems offer you this
possibility thanks to their high efficiency filters. Then, your sound chain offers its best, the picture shows you
the real capability of your display. The system reaches the perfection of operation.
45
SPP0406
Mains Power Filter
Perfection of image and sound by purification of current and voltage
Aluminum profile contruction for improved shielding and strength
ON/OFF 2 pole Switch
Overload protection by user replaceable fuse
Anti-thunder and overvoltage protection
Mains surge protection : 3150 Joules total
6 filtered and protected outputs
RJ11 Phone/Fax/Modem protection
RJ45 network protection
Terrestrial antenna protection
Satellite antenna protection
Ref. SPP0406
This equipment must be connected to a properly grounded socket.
Electrical specifications :
Power rating : 230VAC, 50-60Hz, 15A max
4 Cascaded EMI/RFI Filters : Up to 75dB from 100kHz to 100MHz
Protection Mode : Full 3 lines (L-N, L-PE, N-PE)
Maximum energy dissipation : 3150 Joules
Response Time : < 1 nanosecond
Max. Spike current : 58500 A
Max. Spike voltage: 6000 V
Max. Clamping voltage : 775V
> NEW