Specifications

MADE TO
MEASURE
With DVD, digital cables and satellites, the images transits in YUV
or RVB. The signal circulates via several conductors to reduce
degradation to the minimum. In component (YUV), three coaxial
are enough to get an image through: one for light, one for the
blue component and the other for the red component. You need
four for RVB scart: one for the red component, one for the green
component, one for the blue component and the other for the video
synchro. In RVBShSv, you need five of them, for compared with the
RVBs, the video synchro is separate: one for the horizontal video
synchro and the other for the vertical video synchro.
Real Cable is now developing is "custom" range, for not only
according to the equipment, the image circulates in YUV or RVBs,
or in RVBShSv, but also because there are different connectors to
link the sources with the diffusers. Video projectors with a input
scart for receiving RVB are very rare! With its "custom" range,
Real Cable is now the only manufacturer able to design the video
cable to suit your system ideally, with a bonus of an incomparable
image quality on account of using top-of-the-range conductors and
connections, silver solder and assembly by hand.
Alongside Composite, S-Video and Component cables, the video
signal can still circulate through other kinds of plugs (DB15, scart,
BNC, RCA), but also in RVB with separated synchro (RVBs) or
in RVB with two separate synchros (RVBHV). To allow all type of
linkage possible, Real Cable offers customised cables, for making
unusual cables, like, for example, a DB15 / 3 RCA for bringing a
Component signal from a DVD player to a video projector.
MADE-TO-MEASURE
40
VIDEO MADE-TO-MEASURE