Specifications

15
AUDIO SPEAKER CABLE
HD TDC
Prestigious Loudspeaker Cable
Conductors in Oxygen Free Copper (OFC), OCC Copper and Silver, Multi-wires / Multi
sections (TDC Q-Litz), available in 6 mm
2
, assembled 2 x 3m cable, banana plug or
fork connectors.
Spools
Ref. HDTDCOCC600/30M ❘ 6,00 mm
2
❘ 30 m
Ref. HDTDCOCC600/3M ❘ 6,00 mm
2
❘ 2 x 3 m
Possibility of bi-wiring on demand.
The perfect combination of Real Cable
®
technologies for a balanced power
The HD TDC cable takes the TDC principle to its highest level, combining it with a Quasi-Litz type manufacture. In fact, the different groups of
strands are all insulated from each other, allowing extra precision in the distribution of signal frequencies in conductors. Thus, each frequency
group can find a dedicated channel without affecting the others. So as to achieve perfect transparency and allow strong low frequency
currents to pass through with the minimum of loss, the bass dedicated channel is in OCC copper. Likewise, the extreme trebble channel
contains silver for linear output in high frequencies in new audio formats (DVD-audio and SACD).
The different insulated channels are dimensioned so that they all have the same impedance, with their strands being all different. This makes
it possible to optimise the use of conductors, while ensuring consistency, balance and transparency.
Positive and negative conductor groups are separated by air, thanks to the “Hollow tube” and twisted so as to minimise linear capacity
and inductance. Thus, audio speakers function without parasitical elements between the amplifier and their internal filters.
Total section of a conductor : 6 mm
2
.
Available length : 2 x 3 m.
Insulation core
Hollow Tubes
OFC + Silver
OFC Copper
OCC Copper
> NEW
TESTED BY