User manual

Manual Contents
__________________________________________
Manual Contents 1-0
Welcome! Product Description 1-1
System Requirements for Setup 1-2
Installation 1-3
Self-EDID Programming Procedure 1-5
Troubleshooting, Maintenance, Technical Support 1-6
Product Specifications 1-7
Warranty Information 1-8
Regulatory Statements 1-9
Pictorials
Figure 1 – Schematic Connection Diagram of
Optical DVI Extension Modules 1-1
Figure 2 – Connection of power adapter to the
transmitter 1-3
Figure 3 – Connection of power adapter to the
receiver 1-3
Figure 4 – Connection of optical fiber 1-4
Figure 5 – Connection of the transmitter to DVI source 1-4
Figure 6 – Connection of the transmitter to the display 1-4
Figure 7 – Position of EDID-PRGM. button and Self
EDID LED 1-5
1- 0 Manual Contents
UL/IEC Statement
This equipment has been tested and found to comply with the limits for
medical devices in IEC 60601-1:1994. These limits are designed to provide
reasonable protection against harmful interference in a typical medical
installation.
This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to other devices in the vicinity. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to other devices, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving device.
 Increase the separation between the equipment.
 Connect the equipment into an outlet on a circuit different from that
to which the other device(s) are connected.
 Consult the manufacturer or field service technician for help.
 Type of protection against electric shock: Class I equipment
 Degree of protection against electric shock: Not classified - no applied
parts
 Classification according to the degree of protection against ingress of
water as detailed in the current edition of IEC 529: IPX0, ordinary
equipment
 This equipment is not suitable for use in the presence of flammable
anesthetics or oxygen
 Mode of operation: continuous operation
Certification of Eye Safety
This laser product is inside implemented by using 1300/1550nm optical
module, manufactured by Dtrovision, which are all certified by IEC/EN60825-1
referred in Accession Number 07-1334-0217 as classified in Laser Class1.
1-9 Regulatory Statements