© 2013 Dtrovision Co., Ltd. All Rights Reserved Revision 2.0 2013 OLC II Fiber Optic DVI Extension Cable User Manual PureLinkTM 535 East Crescent Ave Ramsey, NJ 07446 Tel: 201.488.3232 Fax: 201.621.6118 Website : www.purelinkav.com E-mail : info@purelinkav.com For Technical Support, contact us at : support@purelinkav.com PureLinkTM 535 East Crescent Ave Ramsey, NJ 07446 Tel: 201.488.3232 Fax: 201.621.6118 Website : www.purelinkav.com E-mail : info@purelinkav.
UL/IEC Statement Manual Contents __________________________________________ Manual Contents 1-0 Welcome! Product Description 1-1 System Requirements for Setup 1-2 Installation 1-3 Self-EDID Programming Procedure 1-5 Troubleshooting, Maintenance, Technical Support 1-6 Product Specifications 1-7 Warranty Information 1-8 Regulatory Statements 1-9 Figure 1 – Schematic Connection Diagram of 1-1 Figure 2 – Connection of power adapter to the transmitter 1-3 Reorient or relocate the recei
Warranty Information Welcome! Two Years Warranty Congratulations on your purchase of the PureLink OLC II Optical DVI (Digital Visual Interface) Extension Module. This manual contains information that will assist you in installing and operating the product. Dtrovision warrants this optical DVI extension module to be free from defects in workmanship and materials, under normal use and service, for a period of two (2) years from the date of purchase from Dtrovision or its authorized resellers.
System Requirements for Setup Hardware requirements You have to have a DVI graphic controller or card having a DVI port in your PC, SUN or Mac systems. It should support the maximum graphic resolution feature of displays to be connected. No special requirements for memory size, CPU speed and chipsets, if you’ve already properly installed your DVI graphic controllers or cards. OLC II Optical DVI Extension Modules Compliance with DVI standard: Supports DVI1.
Troubleshooting The display displays only black screen. - Ensure that all plugs and jacks used by external power supplies (both Dtrovision and others) are firmly connected. Ensure the blue LED ON. - Ensure that the DVI ports are firmly plugged in to the PC and display. - Ensure that the transmitter and receiver modules plugged correctly to the PC and display, respectively. - Check if the PC and display are powered on and properly booted.
Step 5 Self-EDID Programming Procedure Connect LC optical fiber between the transmitter and the receiver as shown in figure 4. The graphic source equipment generally requires communication of display information (EDID). Display information (EDID) contains resolution and timing information for your display. OLC II supports Self-EDID programming. Self-EDID programming means that the EDID from the display is stored in the transmitter.
