Owner`s manual

PureLink by Dtrovision
7
Installation and Connection Instructions
Installation Instruction
1. Turn off the video source and monitor before connecting any cable.
2. Connect DVI-D, VGA, Fiber, CAT5, and RS-232 cable.
3. Connect 12V DC power adapter to both transmitter and receiver module.
4. Turn on the monitor
5. Turn on the video source
How to connect fiber cable between ODA II Tx and ODA II Rx
*Please refer to the connection diagram below*
Tx optical port# 1 ----------- > Rx optical port# 1
Tx optical port# 2 ----------- > Rx optical port# 2
RS-232 Connection
Set up connection in the order illustrated below before use.