ODA II Owner’s Manual DVI/HDMI + RS-232 + Audio Fiber Optic Extension Module PureLinkTM 535 East Crescent Avenue Ramsey, NJ 07446 USA Tel: +1.201.488.3232 Fax: +1.201.621.6118 E-mail: sales@purelinkav.com www.purelinkav.com For order support, please contact your local dealer. For technical support, please contact us at support@purelinkav.
PureLink by Dtrovision Package Contents Please make sure all of the following items are included in the package: 1) ODA II-Tx / ODA II-Rx 2) DC 12V Power Supply Unit with a power cord 3) User Manual 2
PureLink by Dtrovision General Specification Purelink’s new ODA II Tx / Rx is a standalone fiber optic signal extension system capable of transmitting DVI/HDMI, 3.5mm Stereo Audio and RS-232 signal over two strand fiber optic cable. In addition, the fiber type can be either single mode or multimode. There is distinctive difference in distance depends on the type of fiber cable being used at the time.
PureLink by Dtrovision Dimension 4.3’(W) x 3.1’(D) x 1.6’ (H) (Inch) Weight TX, RX 0.
PureLink by Dtrovision Operation and Reliability Specification 1. Operating Environment Temperature : 50F ~ 104F (10℃~ 40℃) Humidity : 10% ~ 80% Altitude : 3,000m Max. 2. Transit Environment Temperature : -13F ~ 140F (-25℃~ 60℃) Humidity : 5% ~ 95% Altitude : 15,000m Max. 3. Storage Environment Temperature : -4F ~ -49F (-20℃~ 45℃) Humidity : 5% ~ 95% Altitude : 3,000m Max. 4.
PureLink by Dtrovision Main Features 1. High Quality Picture - No Signal Loss and Digital Noise Free ODA II Tx / Rx is designed to deliver the highest quality picture preserving the native resolutions of the digital/analog video sources, or analog stereo audio, or RS-232 communication without any signal loss. At the same time, the digital noises that may affect the picture quality will be eliminated.
PureLink by Dtrovision Installation and Connection Instructions Installation Instruction 1. Turn off the video source and monitor before connecting any cable. 2. Connect DVI-D, VGA, Fiber, CAT5, and RS-232 cable. 3. Connect 12V DC power adapter to both transmitter and receiver module. 4. Turn on the monitor 5.
PureLink by Dtrovision Product Exterior Product Dimension ( W* D *H ): 4.3 ‘’ x 3.1 ‘’ x 1.6’’ (inch) Weight: 0.
PureLink by Dtrovision *Front Panel : Power LED SIGNAL : Status LED SELECT : EDID Rotary Switch (Tx only) SAVE : EDID Save Button (Tx only) FIRMWARE : Software upgrade *Rear Panel DVI/HDMI IN, OUT : DVI-D/HDMI port Audio IN,OUT : 3.
PureLink by Dtrovision How to use the ODA II extender Internal EDID DATA Select EDID data of your choice from the list below by adjusting MODE switch.
PureLink by Dtrovision Technical Specification Data Transfer Speed: Up to 2.25 Gbps (Single Link) Frequency Range: 25 ~ 165 MHz Supporting Display Resolutions: Up to WUXGA (1920X1200)@60Hz / 1080p I/O Signal Standard: Digital RGB, VGA, Stereo Audio (3.5mm) RS-232 (Max Baud Rate: 115200 bps Max Distance: 1,000m (3,300ft) at 1920x1200@60Hz / 1080p 1,500m (5,000ft) at 1600x1200@60Hz / 1080i Optical Source: 850 nm Vcsel Optical Cable Specification: Single / Multimode 50/125 or, 62.
PureLink by Dtrovision Warranty PURELINK STANDARD LIMITED WARRANTY For Products purchased directly from PureLink or Dealer, PureLink warrants Products shall be free from defects in workmanship and materials, under normal use and service, for a period of five (5) years on parts and three (3) years on labor for PureMedia and Media Axis Products, (39) months on parts and labor on all PureView products, and three (3) years on parts and labor for all other Products from date of purchase.
PureLink by Dtrovision FCC/CE Statement This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE certification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must not accept any interference received, including interference that may cause undesired operation.
