Owner`s manual

Installation
Important: Please use the installation procedure below. Improper, or no operation may result if the start-up
sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
With system power turned off, connect the upstream Transmitter box to the DVI receptacle of a
media receiver or a computer by one DVI copper cable in the shipping group.
Figure 2 – Connection of DVI cable between Transmitter box and media receiver
Step 3
In the same way as above, connect the Receiver box into the DVI receptacle of the display by the
other DVI copper cable.
Figure 3 – Connection of DVI cable between Receiver box and display