User Manual DVI Pure Fiber Optic Extender Dual Link ODC PureLinkTM 535 East Crescent Avenue Ramsey, NJ 07446 USA Tel: +1.201.488.3232 Fax: +1.201.621.6118 E-mail: sales@purelinkav.com www.purelinkav.com For order support, please contact your local dealer. For technical support, please contact us at support@purelinkav.
Unpacking Each DVI Pure Fiber Optic Extender Dual Link package includes the following items; - ODC TX/RX Unit - DVI-D Dual Link Cable – 1.
Contents Contents 1-1 Description, General Specification 1-2 Environmental and Reliability Specifications 1-3 Main Features 1-4 Video Connection 1-5 Mechanical Specification 1-6 Technical Specification 1-7 Warranty Information 1-8 Troubleshooting 1-9 3
Description, General Specification Send DVI video signal and digital audio signal to long distance using pure fiber optic cable (multimode 8 strands) Owing to its compact size and low power design ODC connects monitors only for DVI-D dual link, PDP, and projectors at the lowest price ODC uses fully insulated fiber optic cable and is rarely affected by electronic wave or electric noise.
Environmental and Reliability Specifications Recommended environmental conditions for the operation are temperature range of 10°C~40°C, noncondensing humidity levels of 10%-80%, and altitude ceiling of 3,000 meters (9,840 feet).
Main Features High Quality Picture - No Signal Loss and Digital Noise Free Our ODC is built to deliver the highest quality picture preserving the native resolutions of the video sources without any signal loss. At the same time, the digital noises that may affect the picture quality will be eliminated.
Video Connection Step 1: Ensure the digital video/audio source and display is turned off Step 2: Connect the digital DVI-D Dual Link cable and fiber optic cable to ODC module Step 3: Connect power adapter to the transmitter (TX/RX) module of ODC Step 4: Connect power code to the power adapter and plug in to power outlet Step 5: Turn on the display Step 6: Turn on the source EDID data saving Step 1: Connect DVI Input port on ODC TX unit to display such monitor or HDTV Step 2: Push EDID S/W for 3~4 seconds St
Mechanical Specification Dimension: 125x111x35 mm TX Functioning part DVI In: DVI-D Dual Link Input port SPDIF In: Digital Audio (Optical, Coaxial) Input port DIP S/W: Digital Audio (Optical, Coaxial) selection switch A-R2-G2-B2-R1-G1-B1-C: Fiber optic cable connection port DC-12V: power input port Display part POWER LED: display Power on/off EDID LED: display the status of EDID appropriate operation EDID S/W: EDID operation switch HPD LED: display the status of DVI Input RX Functioning part DVI Out: DVI-
Technical Specification Data transmission speed: 2.25 Gbps (Dual Link) Digital Video Bandwidth: 25~268.5 Mhz Resolution: Up to QXGA (2560x1600)@60Hz 1080P Input/output signal standard: Digital RGB, TMDS, SPDIF Maximum length: 2560*1600p -> 500m (1640ft) Optional -> 1000m (3280ft) Light Source: 850 nm Vcsel Fiber Optic cable: 50/125 & 62.
Warranty Information PURELINK STANDARD LIMITED WARRANTY For Products purchased directly from PureLink or Dealer, PureLink warrants Products shall be free from defects in workmanship and materials, under normal use and service, for a period of five (5) years on parts and three (3) years on labor for PureMedia and Media Axis Products, (39) months on parts and labor on all PureView products, and three (3) years on parts and labor for all other Products from date of purchase.
Troubleshooting The DVI Pure Fiber Optic Extender Dual Link is designed for years of trouble free service, please reference the troubleshooting chart below if experiencing issues with the device. Problem No picture(or signal) Solution 1. Ensure the power LED is illuminated. 2. Check if TX or RX module is properly connected to sources or displays. 3. Check if fiber optic cable is properly connected. 4. Make sure that the display is only for DVI-D Dual Link 5.
