Full Product Manual

DO NOT over tighten hardware
Step 1)
Attach the Base (C) to the Fire Bowl (A) by
usi
ng bolts (H1). Full tighten all bolts. (View Fig 1)
Step 2)
Attach Support Bar (I) and Connect B (K)
to the Fire Bowl (A) by using bolts (H1).Finger
Tighten and do not fully tighten all bolts. Connect
4PCS of Outer Ring (B) to a square ring by using
D( Plastic Connector). Hold the fixed square ring
by Connector A (J) and Connector B (K) by using
Bolts (H2) . Tighten all the bolts accordingly with
the provided Allen Wrench until all pieces fit
together securely(View Fig 2)
Step 3)
Affix Lid Ring (G) to the Mesh Lid (F) by
screwing the lid ring into the upper hole of the
mesh lid. Then place the mesh lid on the Fire
Bowl (A). (view Fig 3)