Owner Manual

GQBrands.com [e-mail] 1-866-498-5269
14
FREQUENTLY ASKED QUESTIONS
• Question: “How should I clean my
seesaw?”
Answer: you should clean the Seesaw
with a solution of warm water and
Non- Corrosive/Abrasive soap.
Dampen a rag with this solution and
wipe completely dry before using.
• Question: “Is there any maintenance I
need to do for my seesaw?”
Answer: you should always double
check to make sure all your bolts are
tight and secure, and that seats are
securely in place before use.
• Question: “A seat seems loose, what
should I do?”
Answer: Make sure the Bolts/Nuts
under the plastic seat are secure.
• Question: “Something was missing
from the packaging,” “I need to
purchase a replacement part” or “I
discovered a damaged piece. What
should I do?”
Answer: Contact customer service.
You must have proof of purchase and/
or order confirmation available to be
considered for warranty replacement.
You must report missing pieces within
30 days of purchase.
CARE & MAINTENANCE
• Your Rocker Seesaw is designed to be very low
maintenance.
• If any part of the seesaw requires cleaning, simply wipe
with a damp cloth.
• Regularly check to see if the steel tubes, seats,
backrests and other parts are tightened and completely
secure. Replace worn & damaged parts if found and if
necessary, secure from use until replacement parts can
be obtained.
• If the paint is chipped, we recommend you lightly rub
the damaged area and cover using a non-toxic enamel
paint.
• IMPORTANT: While no regular maintenance is required,
you must inspect the seesaw before each use and
replace any worn, defective, or missing parts. The
following conditions could represent potential hazards:
Missing, improperly positioned, or insecurely attached
frame parts, Missing, improperly secured or damaged
seats, and/or a bent or broken rocker, Cease using
seesaw immediately and secure it against unauthorized
use if any of these conditions are present.