Owner Manual

MODEL#9306RS
ASSEMBLY INSTRUCTIONS
7
STEP 3
Parts:
Part 6 (x4) - Seats
Part 10 (x12) - Square Nuts
Part 8 (x12) - M6 40mm Bolt
Place the remainder of the Seats
at the end of the Base Rails with
the flat surface of the Seats facing
the floor. Place 2x on each side as
shown. Align the side openings to the
corresponding Base Rails opening.
Place the Square Nuts (Part 10) at the
end gaps of the Seat openings, and
secure with a M6 40mm Bolt (Part
8) aligned by the Base Rail and Seat
openings.
NOTE:
When Installing the Seats to the Base
Rails, do not install to the 4 locations
circled as shown. These are reserved
to install the Handle Bars in Step 12.
6
10
8
8
8
10
10
6
6
6
Do not Install