Warranty

8
MODEL# 9414TS - TRAMPOLINE
TRAMPOLINE ASSEMBLY INSTRUCTIONS
STEP 4:
Gather all Leg Extensions (Part 5) and U-
Shaped Legs (Part 6). You will be
attaching 2 leg extensions (5) to each U-
Shaped Leg.
NOTE:
The Leg Extension will have 3 openings.
The 2 openings closest to each other, will
go on the top and connect to the T-
Section at the top of the trampoline. Make
sure to connect the U-Shaped leg to the
single horizontal hole on the leg
extension.
STEP 5:
Attach the U-Shaped Leg (6) to the Leg
Extension(5) with 1 M6x45mm bolt (4)
and Nut (4a). Tighten with the Wrench
Tool (9).
Repeat step 5 until you have 6 sets of U-
Shaped legs with extensions.