SINGLE ROCKER KIDS SEESAW MODEL# 9339SRS PRODUCT MANUAL - VERSION 5.20.01 FOR AGES: 3-7 WEIGHT LIMIT: 75 TO BUILD: Lbs X TOOLS NEEDED: 1 Manual en español ubicado en GQBrands.com Spanish Manual located at GQBrands.com CUSTOMER SERVICE GQBrands.com • CustomerService@GQBrands.
CUSTOMER SERVICE INFORMATION Thank you for purchasing: SINGLE ROCKER KIDS SEESAW MODEL# 9339SRS To register you product please visit: www.globalqualitybrands.com/product-registration or Scan code If you have an issue with your item, do not return. Please report items that are damaged or missing parts to the manufacturer GQ Brands within three days of delivery. Contact customer service at customerservice@gqbrands.com to open a ticket.
WARNINGS ADULT ASSEMBLY REQUIRED CHOKING HAZARD - Small Parts NOT for children under 3 years of age. Please read these warnings and the information in this manual in its entirety. Failure to comply with the following instructions may increase the risk of serious injury and/or death: • This unit must be assembled and disassembled by ADULTS ONLY. • DO NOT allow children to stand on the seesaw. • This See Saw is suitable for use by most children 3 TO 7 YEARS OF AGE.
PARTS LIST 1 - Base Rail 2- Base Bar x2 x2 3 - Handlebar Arm A 4 - Handlebar Arm B x1 x1 5 - Backrest Arm A 6 - Seat/Back Rest x1 x2 7 - Handle Bar 8 - Side Rail A x1 4 x1 GQBrands.com CustomerService@GQBrands.
PARTS LIST 9 -Side Rail B 10 - Backrest Arm A x1 x1 11 - Foot Rest 12 - Seat Rails x1 13 - M6x40mm Bolt x10 18 - M8x20mm Bolt x2 22 - Allen Wrench MODEL# 9339SRS 14 - M6 Washer x2 15 - M6 Nut 16 - M6x35mm Bolt x10 x10 x8 19 - M8 Washer 20 - M6x15mm Bolt 21 - Safety Caps x2 x4 17 - Square Nuts x8 x10 23 - Service Wrench 5
ASSEMBLY INSTRUCTIONS STEP 1: Parts: Part 1 (x2) - Base Rail Part 2 (x2) - Base Bar Part 3 (x1) - Handlebar Arm A Part 4 (x1) - Handlebar Arm B Part 5 (x1) - Backrest Arm A Part 10 (x1) - Backrest Arm B Part 13 (x4) - M6x40mm Bolt Part 14 (x4) - M6 Washer Part 15 (x4) - M6 Nut 10 13 5 1 14 4 Attach both Base Rails (Part 1) and Base Bars (Part 2) to create the bottom frame of the seesaw. 15 14 15 2 13 14 3 13 14 15 15 1 2 Locate the outer openings on the Base Rail.
ASSEMBLY INSTRUCTIONS STEP 3: 13 10 15 Parts: Part 8 (x1) - Side Rail A Part 9 (x1) - Side Rail B Part 13 (x4) - M6x40mm Bolt Part 14 (x4) - M6 Washer Part 15 (x4) - M6 Nut 9 14 NOTE: The Side Rails A & B will have 8 openings on the side and 4 on the bottom. Make sure that all bottom openings are facing the floor. 4 5 13 14 15 15 14 13 Align the openings of the Side Rails hooks to the bottom openings of all arms as shown.
ASSEMBLY INSTRUCTIONS STEP 5: Parts: Part 11 (x1) - Foot Rest Part 18 (x2) - M8x20mm Bolt Part 19 (x2) - M8 Washer At the bottom of the Handlebar arms, there are two openings to install the Foot Rest (Part 11). Install using the hardware provided. 4 19 11 18 3 18 19 STEP 6: Parts: Part 12 (x2) - Seat Rails Part 20 (x4) - M6x15mm Bolt Flip the seesaw over to install the Rails for the Seat.
ASSEMBLY INSTRUCTIONS STEP 7: Parts: Part 21 (x18) - Safety Caps 21 21 MODEL# 9339SRS Install all Safety Caps to all Bolts installed in the product. NOTE: Failure to install safety caps can result in severe injury. Do not remove. If a safety cap is missing/broken, do not use product until covered completely.
FREQUENTLY ASKED QUESTIONS Question: “How should I clean my seesaw?” Answer: you should clean the Seesaw with a solution of warm water and Non- Corrosive/Abrasive soap. Dampen a rag with this solution and wipe completely dry before using. Question: “The seat seems loose, what should I do?” Question: “Something was missing from the packaging,” “I need to purchase a replacement part” or “I discovered a damaged piece. What should I do?” Answer: Make sure the Bolts/Nuts under the plastic seat are secure.
