36-INCH RACE CAR KIDS TRAMPOLINE WITH HANDRAIL MODEL# 9023CT / PRODUCT MANUAL - VERSION 08.18.01 FOR AGES: 3-7 WEIGHT LIMIT: 75 Lbs 34 Kgs TO BUILD: X 1 TOOLS NEEDED: N/A CUSTOMER SERVICE GQBrands.com • CustomerService@GQBrands.
CUSTOMER SERVICE INFORMATION Thank you for purchasing: 36-INCH RACE CAR KIDS TRAMPOLINE WITH HANDRAIL MODEL# 9023CT To order these parts, or if you have any other questions or concerns about this GQBrands product, please contact us at At GQBrands®, we want all of our customers to be completely satisfied with their purchase. Take time to review the contents of the product you have just received to make sure that all of the parts are included.
WARNINGS ADULT ASSEMBLY REQUIRED CHOKING HAZARD - Small Parts NOT for children under 3 years of age. Please read these warnings and the information in this manual in its entirety. Failure to comply with the following instructions may increase the risk of serious injury and/or death: • This unit must be assembled and disassembled by ADULTS ONLY. • DO NOT fall or bounce on your knees - this can cause injury. • Children must be supervised at all times when using this equipment.
PARTS LIST 2- Frame Pad 1- Fold Mat and Frame x1 x1 4- Side Handrail 3- Plush Face 5- Center Handrail Front Back 6- Safety Hook x2 4 x1 x2 7- Leg 8- Leg Cap x6 x6 GQBrands.com 9- Frame Cap 10- Springs x6 CustomerService@GQBrands.
ASSEMBLY INSTRUCTIONS STEP 1 1 Parts: Part 1 (x1) - Fold Mat and Frame Locate the middle of the Jump Mat and Frame (1) and unfold to make half a circle in shape.
ASSEMBLY INSTRUCTIONS STEP 3 Apply weight to one side of the Jump Mat and unfold to complete the circle. NOTE: Make sure to keep applying pressure to the Frame to avoid tension to close the frame. Failure to do so can cause injury. STEP 4 4 Once the Mat is Completely unfolded and the Jump Mat is Stretched out properly, place the Safety Hooks (6) back on both brackets. Make sure the Safety Hooks are completely inserted, and use the clasp to secure the Frame Pad from Unfolding. 6 GQBrands.
ASSEMBLY INSTRUCTIONS STEP 5 9- Frame Cap Remove all Frame Caps (9) from the Jumping Mat and Folding Frame. x6 This will expose the screws to insert the Legs (7) into in Step 6. STEP 6 7- Leg 8- Leg Cap x6 Grab 4x Legs (7) and insert 4x Leg Caps (8) to create 4 Assembled Legs. You will have 2 legs that do not need Leg Caps until Step 7. x4 Twist the Legs into the 6 exposed screws in the Frame.
ASSEMBLY INSTRUCTIONS STEP 7 Flip the Trampoline over so that the legs are facing the floor. 4 4 Slide a Side Handle Rail (4) on each of the Legs without Leg Caps and secure with the remainder of the Leg Caps. Make sure that both Side Hand Rails Are facing each other 8 8 STEP 8 Insert the Center Handrail (5) in between both Side Handrails and use the Snap and Click buttons to secure. 5 Make sure that the curved end is pointing outward and giving space for the trampoline to show.
ASSEMBLY INSTRUCTIONS USING SNAP & CLICK BUTTONS STEP 9 Place the Frame Pad (2) on top of the Trampoline so that the soft texture is facing upwards.
ASSEMBLY INSTRUCTIONS STEP 10 Pull the Loop on front of the Frame Pad and stretch it until it is hooked to the Leg A STEP 11 Attach the Plush Pillow (3) to the exposed Velcro straps on the Frame pad. Align both Velcro straps to their respective sides with the face of the Plush facing outward 3 10 GQBrands.com CustomerService@GQBrands.
ASSEMBLY INSTRUCTIONS STEP 12 On the back of the Plush Face there is a Hook Strap that must be inserted in the front leg of the Trampoline. Slide the Hook from the bottom of the Leg until it passed the Lag Cap. STEP 13 There are 3 String Locations. In the Back of the Frame Pad, Left Hand Rail, and Right Hand Rail.
NOTES CUSTOMER SERVICE GQBrands® 1-866-498-5269 CustomerService@GQBrands.com 4401 Samuell Blvd, Ste 150 Mesquite, TX 75149 12 GQBrands.com CustomerService@GQBrands.
