Installation Guide

8
Step 2: Place Legs on Trampoline
Twist 4x Legs into the threaded grooves on trampoline, until secure. Make sure to leave two spaces
empty as shown below.
Step 3: Attach Handrail Supports to Trampoline
Flip the trampoline over. Use a screwdriver to punch two holes on the padding where the handrail will
assemble as shown below.
Locate the remaining 2x Legs and place them through Handrail Supports A (7) and B (8). Secure the
Handrail Supports onto the remaining 2x legs using the 2x Screws (11), Nuts (12), Safety Cap Nuts (13)
and Washers (X1), as shown below. Secure the legs to the frame as described in Step 2.
NO LEG
NO LEG