Installation Guide

4. Attach Top Handrail to Handrail Supports.

Insert both ends of the Top Handrail sections (9,10) into the Right and Left Handrail Supports. Once

secure, join the center of the Handrail by pushing the pin on the “Male” Top Handrail section, and

allowing the two pieces to slide together. Make sure you hear a “clicking” sound and that the joined

sections are secure before continuing.

Step 5. Adjusting the Handlebar Height

To adjust the height, first separate the top handrail like in picture A1 and A2. Next press the push pin on

leg support tubes as shown in diagram B1 and B2. Move the handrail sections so that they are

level

and

ensure that the push pins snap securely back into their corresponding housings. Lastly, reconnect the

handlebars at the center.