EVOK E - 1 X T Now playi ng
Controls and Connectors Front panel Autotune – press and release to scan UK only Band III. Press and hold for around two seconds to scan the full range of digital frequencies in Band III. Standby - press to switch between standby mode and power on Timer - press and use Tune to set a countdown timer which will sound an alarm after the period you set (range from 1 min to 23hr 59 mins) Info - press and repeat to change the text shown on the bottom of the display e.g. scrolling text or time and date.
Using your EVOKE-1XT Changing stations Change stations using the Tune knob (or by selecting a numbered preset button). 1. Turn the Tune knob to find the station you want. The current station is shown at the top of the screen. 2. Push and release the Tune knob to change the station. A station with ‘?’ before its name is currently unavailable either because you have lost reception or the station is not currently broadcasting. You can use the ‘Trim stn.
Setting an alarm EVOKE-1XT has a daily alarm which switches EVOKE-1XT on (if in standby mode) and tunes to the station you have chosen or sounds a tone. To set or change an alarm: 1. Press the Menu button to see the current alarm settings. 2. Push the Tune knob if you want to change the alarm settings. 3. Turn the Tune knob to scroll through the following settings and push to change them. The current setting is shown on the top line of the screen. Set alarm Set the alarm on or off.
Setup options Press the Menu button, turn the Tune knob and push to select alarm settings or one of the following setup options. Station order Changes the order of stations on your station list. Turn the Tune knob to scroll through the following options and push to select one: Alphanumeric Displays all stations in alphanumeric order. Fav station Displays your six most listened to stations at the top of the station list and the rest below, in next to their names. alphanumeric order.
Sw version Displays the version of the software in your radio. You may be asked to quote this if you contact Technical Support. Sw upgrade You can upgrade the software in your EVOKE-1XT using a PC connected to the USB port on the rear panel. To upgrade, select Sw upgrade and follow the instructions provided with the software. Upgrades may be issued to provide enhanced functions or improve performance. Check our website at www.puredigital.com for details of when software upgrades are available.
Hints and tips (<>) Secondary services Secondary services accompany some stations, providing extra information or alternative content and may only be broadcast at certain times. At the time of writing not many secondary services are available. If a station has one or more secondary services available the display will show ‘>>’ next to the station name on the station list and the secondary service will appear next to the station as you turn the Tune knob.
Safety instructions 12D49 Keep the radio away from heat sources. Do not use the radio near water. Avoid objects or liquids getting into the radio. Do not remove screws from or open the radio casing. Warranty information Imagination Technologies Ltd. warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of two years from the date of purchase.