Specifications

RUSKA 7250, 7250i, 7250xi & 7250LP
Users Manual
5-8
Standard Event Status Register (ESR), Standard Event Status Enable Register (ESE)
Bit 7 Power-on. Set at power-up.
Bit 6 Reserved 0.
Bit 5 Command error. Error in command syntax.
Bit 4 Execution error. Error in command execution.
Bit 3 Device dependent error. Device error independent of commands.
Bit 2 Query error. Output queue empty when request received.
Bit 1 Reserved. 0.
Bit 0 Operation complete. Set for *OPC command.
Operation Status (OPER:EVENT, OPER:CONDITION, OPER:ENABLE)
Bit 0 Calibrating. Currently performing a calibration.
Bit 1 Settling. Control setpoint has not been reached. Pressure tolerance set by
SOUR:PRES:TOL
Bit 2 Reserved. 0.
Bit 3 Reserved. 0.
Bit 4 Measuring. The instrument is actively measuring.
Bit 5 Reserved. 0.
Bit 7 Reserved. 0.
Bit 8 Self-test in progress.
Bit 9 Reserved.
Bit 10 Reserved. 0.
Bit 11 Reserved. 0.
Bit 12 Reserved. 0.
Bit 13 Reserved. 0.
Bit 14 Program running.
Bit 15 Reserved. 0.
Questionable Status (QUES:EVENT, QUES:CONDITION, QUES:ENABLE)
Bit 0 Reserved.
Bit 1 Reserved. 0.
Bit 2 Time is questionable. Set when the clock has not been set.
Bit 3 Temperature is questionable. Sets when oven temperature is not within
range.
Bit 4 Reserved. 0.
Bit 5 Reserved. 0.
Bit 6 Reserved. 0.
Bit 7 Calibration is questionable. Set when the unit has not been calibrated.
Bit 8 Pressure is questionable. Set when the pressure is overranged.
Bit 9 Reserved. 0.
Bit 10 Reserved. 0.
Bit 11 Reserved. 0.
Bit 12 Reserved. 0.
Bit 13 Reserved. 0.
Bit 14 Command warning. Set whenever a command ignores a parameter.
Bit 15 Reserved. 0.