PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION TABLE OF CONTENTS Parts Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chief Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PARTS IDENTIFICATION 1 6 2 7 3 8 4 9 5 10 1. CONTROL PANEL 2. WATER INLET 3. PULSATOR 4. WASH TUB LID 5. HOUSING 6. SPIN TUB LID 7. SPIN TUB 8. POWER CORD 9. PLASTIC SPIN MAT 10. DRAIN HOSE CHIEF TECHNICAL DATA Energy Efficiency Model PUCWM23 Rated Wash Rated Input Rated Power Grade: 5 Capacity Power Source Wash Cleaning Rate Wash Spin 3.5KG 1.5KG Wash 250W Spin Voltage Frequency 120W 110V 60 Hz Consume 0.7 Consume Electricity Water (KWh/Cycle/KG) (L/Cycle/KG) 0.
INSTALLATION Electrical Connection • The unit is designed to function under the recommended power settings mentioned in the rating label at the back of the washing machine. • The power cord must be plugged into a grounded 3-pin outlet. • If the power cord is damaged, it should be replaced by the manufacturer/ distributor or a certified technician. Connection of Water Inlet Hose • Attach the water inlet hose to the water inlet (Please refer to the Parts Identification on page).
WARNING • When connecting the appliance to a water main, only use new hoses, do not use old hoses. • For washing machines with ventilation openings in the base, ensure that nothing is obstruction the openings. • If the power cord is damaged, it must be replaced by the manufacturer/ distributor or a certified technician.
• To remove or reposition clothes during the spin dry cycle, open the spin cover and inner lids. In this case, the spin tub will automatically stop as a brake is activated when the spin cover is opened. • To restart, close both lids, if required, reset the spin timer. • If there is any abnormal vibrating during spin-drying, turn off the spin timer and rearrange the clothes inside the spin tub.
POINTS TO REMEMBER • Avoid using excessive amounts of bleach, soap powder or detergent. Use the amount recommended by the respective manufacturers. • For your safety, ensure that the ground connection is correct. • Never put your hands into the spin tub while it is operation. • When washing, the water temperature should be below 120°F. This is to prevent the plastic components from becoming deformed. • Do not place the washing machine close to heat-generating products such as gas or electric cookers.
If the spin dryer does not work, check whether: • The inner lid and outer spin bowl-lids are closed. • The spin dry timer is set. If there is excessive noise, check whether: • Something is touching the pulsator as it rotates. • The machine is not placed on a level surface. • The wash load in the spin blow is excessively unbalanced during the spin cycle. • A particle is clogged between the spin bowl and tub. MAINTENANCE AFTER USE Wash day maintenance At the end of each wash day.
FEATURES: • 2-in-1 Washing Machine & Spin-Dryer • Convenient Top-Loading Easy Access System • Does Not Require Any Special Parts or Plumbing • Hassle-Free Operation: Simply Insert Detergent & Water • Watch it Work: Translucent Tub Container Window • Top Panel Rotary Control Wash Timer • Energy & Water Efficient Design • Ideal for Smaller Laundry Loads • Perfect for Underwear, Socks, T-Shirts & Towels • Rotary Control Wash Timer • Compact & Portable Size WHAT'S IN THE BOX: • 2-in-1 Compact & Portable Washe
