Instructions / Assembly

9
MODEL# 9308TS
STEP 6:
It is required that the Base be filled with
either sand or water to stabilize and keep it
grounded while in use.
Locate the opening to the side of the middle
Base Cap on the top part of the Base.
Fill with your preferred weight method.
STEP 7:
Parts:
Part 7 (x1) - Base Cap
Part 8 (x1) - Cap Ring
Make sure That the Cap Ring (8) is inside
the Base Cap (7) to prevent it from bending
or releasing from the opening.
Place Base Cap on opening to prevent
weight to escape while in use.
Sand
Water
7
8
ASSEMBLY INSTRUCTIONS
9
8918PP
PASO 6:
Se requiere que la Base se llene con Arena
o Agua para estabilizar y mantenerla
conectada a tierra mientras está en uso.
Localice la abertura al lado de la Tapa de
la Base central en la parte superior de la
base.
Rellene con su método de peso preferido.
PASO 7:
Partes:
Parte 7 (x1) - Tapa
Parte 8 (x1) - Anillo de la Tapa
Asegúrese de que el Anillo de la Tapa (8)
esté dentro de la Tapa (7) para evitar que se
doble o libere de la abertura.
Coloque la Tapa en la abertura para evitar
que el agua/arena se escape.
Arena
Agua
7
8
INSTRUCCIONES DE MONTAJE