Instructions / Assembly

7
MODEL# 9308TS
12
4
3
ASSEMBLY INSTRUCTIONS
STEP 3:
Parts:
Part 4 (x1) - Upper Pole
Part 12 (x1) - Adjustable Knob
With the smaller opening facing upwards to
install the Speed Bag, slide the Upper Pole
(4) to the Middle Pole until you find a proper
height size.
NOTE: Every indent on the Upper Pole is an
appropriate size for the Adjustable Knob to
be installed on.
Once the right height has been chosen,
secure the Adjustable Knob (12).
NOTE: Failure to secure in an indent can
scratch the Upper Pole and/or can cause
the pole to slide off the Base.
7
8918PP
12
4
3
PASO 3:
Partes:
Parte 4 (x1) -
Tubo Superior
Parte 12 (x1) -
Perilla Ajustable
Con la abertura más pequeña hacia arriba
para instalar la Saco de Boxeo, deslice el
Tubo Superior (4) hacia el Tubo Medio hasta
que encuentre una abolladura de altura
adecuado.
NOTA: Cada abolladura en el Tubo Superior
tiene un tamaño apropiado para que la
Perilla Ajustable sea instalada.
Una vez elegida la altura correcta, asegure
la Perilla Ajustable (12).
NOTA: Si no se asegura en una abolladura,
puede rayar el Polo Superior y/o puede
hacer que el Tubo se deslice fuera de la
Base.
INSTRUCCIONES DE MONTAJE