Instructions / Assembly

ManualsBrandsPumpSpy ManualsPlumbingSmartPump Pre-Assembled Wi-Fi Connected 1/2HP Submersible Sump Pump and Battery Backup System with Monitoring and Alerts

INSTALLATION AND OPERATING INSTRUCTIONS

IMPORTANT!

READ ALL INSTRUCTIONS CONTAINED IN THIS MANUAL BEFORE USING THIS PRODUCT.

Save these instructions for future reference. Failure to read and follow the warnings and instructions

within this instruction manual could result in property damage, serious injury or death.

SPECIFICATIONS

WI-FI CONNECTED CAST IRON

SUBMERSIBLE SUMP PUMP

WITH

PUMPSPY CLOUD BASED AUTOMATED

MONITORING & ALERTS

Power Supply Requirements 115 VAC, 60Hz

Motor Amp Rating 7.0 Amp Single Phase –

Insulating Oil Filled

Liquid Temperature Range 40°F to 120°F

Circuit Requirements 15 Amp (Minimum)

Discharge 11/2” NPT

Minimum Basin Diameter 14” Diameter

0 10 20 30 40 50 60 70 80

PUMP PERFORMANCE

Flow Rate (GPM)

Total Head (Ft)

PSMT2000

PumpSpy Technology, LLC

34000 Lear Industrial Parkway

Avon, OH 44011

Summary of content (4 pages)

PAGE 1
WI-FI CONNECTED CAST IRON SUBMERSIBLE SUMP PUMP WITH PUMPSPY CLOUD BASED AUTOMATED MONITORING & ALERTS INSTALLATION AND OPERATING INSTRUCTIONS PUMP PERFORMANCE 35 30 Total Head (Ft) 25 20 15 10 5 0 10 20 30 40 50 60 70 Flow Rate (GPM) SPECIFICATIONS Power Supply Requirements Motor Amp Rating PSMT2000 PumpSpy Technology, LLC 34000 Lear Industrial Parkway Avon, OH 44011 Liquid Temperature Range Circuit Requirements Discharge Minimum Basin Diameter 115 VAC, 60Hz 7.
PAGE 2
SAFETY FIRST! This instruction manual contains very important information for you to know and understand. This information is provided for your safety and to help prevent equipment problems from occurring. Please observe all safety information labeled danger, warning, caution, and notice. WARNING WARNING INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH, SERIOUS INJURY OR MAJOR PROPERTY DAMAGE. RISK OF ELECTRIC SHOCK.
PAGE 3
INSTALLATION 1. Set the pump on a solid, level surface in the bottom of the sump pit. If necessary, use bricks / blocks to provide a solid base. Avoid placing the pump on loose gravel, earth or sand. 2. Install discharge plumbing according to state and local codes. It is highly recommended that rigid 1.5" PVC is used for the discharge line. Installing a union in the discharge line will make it easier to remove the sump pump for maintenance.
PAGE 4
LIMITED THREE-YEAR WARRANTY WHAT THIS WARRANTY COVERS When used and maintained in normal use and in accordance with the Installation and Operating Instructions, your PumpSpy product is warranted against original defects in material and workmanship for a full three years from date of purchase (the “Warranty Period”). During the warranty period, PumpSpy will repair or replace at no cost to you, to correct such defects in products found upon examination by PumpSpy to be defective in materials or workmanship.