Instructions / Assembly
- 1 -
GENERAL INFORMATION
SAFETY INFORMATION
WARNING
To ensure safe and reliable operation, please carefully read this service and
installation manual in its entirety before installing and/or using this product.
Reasonable care and safe methods in according with sound plumbing practices
should be strictly adhered to. Before installation, refer to and understand all
relevant local plumbing and electrical codes.
DO NOT THROW AWAY THIS MANUAL. Keep it in a safe place so that you may
refer to it for periodic service and maintenance.
Always disconnect the power before servicing this product. Failure to do so
may result in serious injury or death. Consult with a qualied electrician if
you are unsure of the power source or cannot determine whether power has
been properly disconnected.
Please review and follow the safety information listed below.
• Risk of electric shock. Always disconnect power before servicing.
• Not to be used as a grid-tie inverter.
• Do not make any electrical connections while standing on a wet surface or with wet
hands.
• Electrical connections and wiring for a pump installation should only be made by
• This equipment is equipped with an approved 3-conductor cord and 3-prong
• Only install indoors in a well ventilated environment. Avoid installing in direct sunlight.
• For proper and safe operation, the temperature range where this unit is to be installed
• DO NOT bypass grounding wires or remove the ground prong from the plug.
• DO NOT use an extension cord.
•
•
DO NOT store anything on top of this unit. This surfaces of this unit may become hot to
the touch, particularly during periods of high demand / use.