Assembly Instructions

Please follow the instructions below in order to properly assemble and
store your sculpture.
SPIDER SCULPTURE
Fig 1
ASSEMBLY INSTRUCTIONS:
No tools required.
Retain carton for storage.
1. Carefully remove all parts from the carton. Your sculpture should include
the following (Fig 1):
A completely assembled pre-lit Spider
2. To illuminate, fully insert the plug into a working GFCI outlet or an
outdoor rated extension cord.
The Spider is now ready to hang on a flat surface by the eyelet at
the top of the Spider frame.
1. Place the Spider in the original carton.
2. Store in cool, dry location away from sunlight.
DISASSEMBLY & STORAGE
Item No. 9401197P-10TMN
Made in China
Printed in China
This is not a toy, for decorative use only.
LEDup Group
Irwindale, CA., 91706 USA
www.ledup.com
LED19
1. Failure to light; unplug the product and check to see that the GFCI outlet
is functioning.
TROUBLESHOOTING
In the event that you should encounter any issues;
please refer to the “Troubleshooting” portion of this
manual or call our toll free customer service
number at 11-888-987-7765, and a trained
representative will assist you.
8”
2019 Menards
Spider Sculpture - Instruction Sheet (English)
Date: 7/10/19
Item # 9401197P-10TMN
9.5”