User Manual

5
Introduction
After unpacking the pump, check the following.
• Is the pump the one that was ordered?
• Do the details on the pump’s nameplate match what was ordered?
• Is all the accessories supplied?
✽ Check the supplied accessories against the “Accessories list” below.
• Has the pump sustained any damage from vibration or impact during transit?
• Have any of the screws come loose or fallen out?
Every care is taken by TACMINA in the shipment of its pumps, but if you
come across anything untoward, please contact your vender or a TACMINA
representative.
Checking out the product
Accessories list
Model for injection of general chemicals: PZ-31/61/12-VEC/VFC/FEC/FFC/FTC
Liquid-end Material VEC/VFC
Model 31 61 12
Hose/tube
Discharge side (3m) PE tube (1/4"×3/8")
Suction side (2m) PVC braided hose (1/4"×3/8")
Relief/air-release hose (1m, installed) Soft PVC hose (4×6)
INSULOK (spare) for relief/air-release hose 1 piece
Anti-siphon check valve 1 set (R1/2)
Foot valve 1 set
Pump-mounting nuts/bolts 2 sets (M5×30)
Operation manual 1 copy
Liquid-end Material FEC/FFC
Model 31 61 12
Tube (5m) PE tube (1/4"×3/8")
Relief/air-release hose (1m, installed) Soft PVC hose (4×6)
INSULOK (spare) for relief/air-release hose 1 piece
Anti-siphon check valve 1 set (R1/2)
Foot valve 1 set
Ceramic weight 1 set
Pump-mounting nuts/bolts 2 sets (M5×30)
Operation manual 1 copy
Liquid-end Material FTC
Model 31 61 12
Tube (5m) FEP tube (1/4"×3/8")
Relief/air-release hose (1m, installed) Soft PVC hose (4×6)
INSULOK (spare) for relief/air-release hose 1 piece
Anti-siphon check valve 1 set (R1/2 or R3/8)
Foot valve 1 set
Ceramic weight 1 set
Pump-mounting nuts/bolts 2 sets (M5×30)
Operation manual 1 copy