User Manual

47
Specifications
• The performance curves below represent the measurements taken under the conditions prevailing at TACMINA’s test
facilities, and are provided here as examples.
• The individual conditions prevailing on-site and differences between models may produce minor variations from these
curves.
• Measure the discharge volume using the conditions under which the pump will actually be used, and set the stroke
speed in accordance with the applicable performance curve.
Performance curve
Model for injection of general chemicals: PZ-31/61/12-VEC/VFC/FEC/FFC/FTC
PZ−31−
VEC/VFC/FEC/FFC/FTC
PZ−61−
VEC/VFC/FEC/FFC/FTC
PZ−12−
VEC/VFC/FEC/FFC/FTC
Discharge volume (L/h)
Conditions: clean water, room temperature
Stroke speed (strokes/min)
0.2
15
0
0.1
120
60 180 300240
0.3
0.4
0.5
0.6
0.7
0.2MPa (29psi)
1.0MPa (145psi)
Discharge volume (L/h)
Conditions: clean water, room temperature
Stroke speed (strokes/min)
0
0.2
1.2
0.8
0.6
0.4
1.0
1.4
0.8MPa (116psi)
0.2MPa (29psi)
15
120
60 180 300240
Discharge volume (L/h)
Conditions: clean water, room temperature
Stroke speed (strokes/min)
0.6
0
0.2
0.4
0.8
1.0
1.2
1.6
1.4
1.8
0.4MPa (58psi)
0.2MPa (29psi)
15
120
60 180 300240
Model for injection of boiler chemicals: PZ-31-FEC (PP)
PZ−31−FEC (PP)
Discharge volume (L/h)
Conditions: clean water, room temperature
Stroke speed (strokes/min)
0.7
0
0.6
0.5
0.3
0.2
0.4
0.1
0.2MPa (29psi)
1.5MPa (217psi)
15
120
60 180 300240