Manual

TRIM 5/8" OFF OF THIS SIDE TO CLEAR HOLE DRILL
4
MATERIALS CHART: PZiG
MATERIALS CHART: PZ / PZD / PZi4 / PZi8
Variety of Liquid End Materials
Variety of Liquid End Materials
MATERIAL PUMP TUBE VALVE CHECK FOOT VALVE BACKPRESSURE SUCTION DISCHARGE
CODE HEAD JOINT SEAT BALL
DIAPHRAGM
& STRAINER INJECTION ASSEMBLY CONNECTION – TUBE* CONNECTION – TUBE*
VFC PVC PVC Viton Ceramic PTFE PVC PVC 3/8" Tube – Soft PVC
2
3/8" Tube – PE
2
VEC PVC PVC EPDM Ceramic PTFE PVC PVC 3/8" Tube – Soft PVC
2
3/8" Tube – PE
2
CL
1
Acrylic PVC Viton Ceramic PTFE PVC PVC 3/8" Tube – Soft PVC 3/8" Tube – PE
ARPZ
1
Acrylic PVC Viton Ceramic PTFE PVC PVC 3/8" Tube – Soft PVC 3/8" Tube – PE
SS 316SS N/A EPDM 316SS PTFE Not Included Not Included 3/8" MNPT – None 3/8" MNPT – None
FFC
1
PVDF PP Viton Ceramic PTFE PVDF – Molded PVDF – Molded 3/8" Tube – PE
3
3/8" Tube – PE
FEC
1
PVDF PP
4
EPDM Ceramic PTFE PVDF – Molded PVDF – Molded 3/8" Tube – PE
3
3/8" Tube – PE
4
FTC PVDF PVDF Teflon Ceramic PTFE PVDF – Molded PVDF – Machined 3/8" Tube – FEP
2,3
3/8" Tube – FEP
2
1
Not available in -32 or -52 size codes.
2
PZ-32 and PZ-52 Models – 18 x12 mm Soft PVC Tube for VFC and VEC Models; 15 x12 mm PTFE Tube for FTC Models
3
Ceramic Weight Included
4
220 psi Model PZ/PZi-31-FEC – 1/4" Tube Joint and Tube – PP
Standard
M
odel: PVC
៑
(VFC/VEC)
• General chemical
applications
• Valve seats and
O-rings are
available in
Viton
®
or EPDM
• Built-in relief valve
Chlorine Model:
្ Acrylic (CL)
• Transparent pump
head allows visual
check of valves
• Reduced head volume
and upward sloping
ports vent gas away
from diaphragm
• Improved pump efficiency
for countering gas lock
• Built-in relief valve
Stainless Steel
M
odel (SS)
៓
• For solvents and other
chemicals where plastics
are not suitable
Chlorine Model:
្ Acrylic (ARPZ)
• CL model with
automatic air release
mechanism
• Derate
capacity
5% for
air release
models
Universal
Model: PVDF ៑
(
FFC/FEC/FTC)
• For most chemicals
and highly corrosive
chemicals
• Valve seats and
O-rings are available
in Viton
®
, EPDM
or Teflon
®
• Built-in relief valve
MATERIAL PUMP VALVE CHECK DIA-
BACKPRESSURE SUCTION/
CODE HEAD SEAT BALL PHRAGM
STRAINER INJECTION DISCHARGE
ASSEMBLY CONNECTION
VTCE PVC EPDM Ceramic Teflon Not Included Not Included 1/2" FNPT
VTCF PVC Viton Ceramic Teflon Not Included Not Included 1/2" FNPT
VTCF-V
1
PVC Viton Ceramic Teflon Not Included Not Included 3/4" FNPT
FTCT PVDF Teflon Ceramic Teflon Not Included Not Included 1/2" FNPT
FTCT-A
2
PVDF Teflon Ceramic Teflon PVDF PVDF 15 x12 PTFE
2
1
High Viscosity Model rated 1000 to 4000 cps. Consult factory for applications greater than 2000 cps.
2
Only these models include Foot Valve Strainer, Antisiphon Check Valve,
plus 15 x12 mm Teflon Suction and Discharge Tubing. Tubing rated 75 psi max.
PZiG with ៑
VTCF Liquid Head
To specify pump, choose the type from
the chart on page 2 plus the size from
the chart on page 3 (ex: PZi4-31). Then
add the appropriate material code from
the chart below (ex: PZi4-31-FFC).
Complete instructions regarding Model
Number Selection are on page 2.
Adapters for NPT
connection are available
*NOTE: 3/8" Tube is 3/8" OD x 1/4" ID;
Adapters for NPT connection are available