Manual

20
PARTS FOR PUMPS WITH MOTOR FLANGE ADAPTER, (REFER TO PARTS DRAWING 000911 ON PAGE 25)
FIG.
NO. DESCRIPTION QTY.
PART
NUMBER
507 Bearing Cup 1 100179
508 Bearing Cone 2 100180
558 Motor Flange Adapter 1 000227
559 Worm Shaft with Retaining Ring attached (Part #107952) 1 000228
560 Lovejoy Coupling 1 100053
561 Oil Seal 1 100214
562 Adapter to Gear Box Bolts 4 100215
563 Adapter to Motor Bolts 4 100216
564 Lock Washer 4 100217
565 Coupling Key 2 100218
566 Lock Washers 4 100219
509 Spring Pin 1 100181
PARTS UNIQUE TO PUMPS SUPPLIED WITH NEPTUNE PNEUMATIC STROKE CONTROL
FIG.
NO. DESCRIPTION QTY.
PART
NUMBER
570 Control Rod “P” 1 000273
571 Control Mount 1 000274
572 Short Mounting Bolt 3 100259
573 Plexiglass Shell 1 000275
576 Piston 1 000276
578 Range Spring, 3-15 psi (9 psi Span) Standard 1 100260
578 Range Spring, 3-9 or 9-15 psi (6 psi Span) 1 100261
578 Range Spring, 5-25 psi (20 psi Span) 1 100262
578 Range Spring, 3-27 psi (24 psi Span) 1 100263
579 Housing 1 000277
580A Moore 73N Control Valve – Forward Acting 1 100265
580B Moore 73N Control Valve – Reverse Acting 1 100266
581 Retainer Bolt 1 100267
583 Pneumatic Diaphragm 1 100268
584 Control Rod Adapter 1 000280
585 Control Spring Pin 1 100269
586 Long Mounting Bolt 3 100270
587 Operating Spring 1 100271
589 Retaining Plate and Stop Bushing 1 000281
PARTS UNIQUE TO PUMPS SUPPLIED WITH “FALP” (REFER TO PARTS DRAWING FALP ONPAGE 23)
FIG.
NO. DESCRIPTION QTY.
PART
NUMBER
562 Adapter to Gearbox Bolts 4
563 Adapter to Motor Bolts 4 100216
564 Lock Washers 4 100217
566 Lock Washers 4 100219
Motor Flange Adapter 1 004157
Motor Worm Shaft 1 004156
Wave Spring 1 107599
Bearing 1 106180
Retaining Ring 1 106593
SECTION VII
PARTS ORDERING INSTRUCTIONS
Note: For Prompt entry of parts orders; your order must include both model number and serial number.