Specifications

Maintenance
Version 2011v1 47
3.10 Lighting, optional
Bulb overview, optional
Function Place Model Order number
Lighting Front Ball light, 24V, 2,4W, E10 00355.4218
Lighting Rear Tube light 24V, 10W, SV8,5 00355.4219
Flashing light Front Tube light 24V, 18W, SV8,5 00355.4212
Flashing light Rear Tube light 24V, 18W, SV8,5 00355.4212
EBAPUM-020710110-nl.doc
3.10.1 Replacing the front light
• See fig. 020710010.
The front lights should be replaced as follows:
• Manually turn the reflector (A) a bit to the left.
• Pull the reflector from the holder (B).
The reflector is attached to the holder with a bayonet
closure.
• Unscrew the bulb (C) from the fitting.
A new bulb should be replaced in the reverse order.
For the proper type of bulb, see 'bulb overview'.
EBAYES-020710010-en.doc
3.10.2 Replacing rear light
• See fig. 020710020.
Rear lights should be replaced as follows:
• Loosen the two screws (A) of the reflector (B) with a
screwdriver with a width of 5 mm.
• Pull the bulb (C) from the holder.
A new bulb should be replaced in the reverse order.
For the proper type of bulb, see 'bulb overview'.
EBAYES-020710020-en.doc
A C B
020710010
A B C
020710020