Specifications

Maintenance
46 Version 2011v1
3.9 Lighting, standard
Bulb overview, standard
Function Place Model Order number
Lighting Front Ball light, 24V, 2,4W, E10 00355.4211
Lighting Rear Pull-out lamp, 24V, 5W, E11 00355.4213
Flashing light Front Pull-out lamp, 24V, 5W, E11 00355.4213
Flashing light Rear Pull-out lamp, 24V, 5W, E11 00355.4213
EBAPUM-020710000-nl.doc
3.9.1 Replacing the front light
• See fig. 020710010.
The front lights should be replaced as follows:
• Manually turn the reflector (A) a bit to the left.
• Pull the reflector from the holder (B).
The reflector is attached to the holder with a bayonet
closure.
• Unscrew the bulb (C) from the fitting.
A new bulb should be replaced in the reverse order.
For the proper type of bulb, see 'bulb overview'.
EBAPUM-020710010-nl.doc
3.9.2 Replacing rear light
• See fig. 020710020.
Rear lights should be replaced as follows:
• Carefully flip the cap (A) up using a screwdriver.
• Pull out the bulb (C) from the fitting (B).
A new bulb should be replaced in the reverse order.
For the proper type of bulb, see 'bulb overview'.
EBAPUM-020710020-nl.doc
3.9.3 Replacing the flashing light
Replacing the flashing light, both front and rear, should be done in the same way as replacing the rear light.
See ‘Replacing the rear light’.
For the proper type of bulb, see 'bulb overview'.
EBAXXX-020710050-nl.doc
A BC
020710010
B C A
020710020