Specifications

Maintenance
40 Version 2011v1
15. Clam on (off), off (on)?
Clam stands for 'Combined Lighting and Actuator Module'. This module is able to control the lighting, the
direction signals, and the 5 gear-motors.
Off:
Switching off
On:
Switching on
The above-mentioned functions can be operated via the controller if the Clam is 'Enabled'.
No gears can be operated if the Clam is 'Disabled'.
A fault signal will occur if the 'Clam' and the 'LM' (Lighting Module, see next paragraph) are
switched on simultaneously ('Enabled').
By pressing 'Yes' this setting can be changed.
16. Lighting on/off
This is the lighting module. This module can only control the lighting and direction indicators.
If this module is installed, the setting can be placed on 'Enable'.
A fault signal will occur if the 'LM' and the 'Clam' (see above paragraph) are simultaneously on
('Enabled').
By pressing 'Yes' this setting can be changed
After pressing 'EXIT' the changes are stored. Then you return to the 'Main Menu'.
EBAPUM-020903020-nl.doc