Specifications

Adjustment options
Version 2011v1 23
2.8.1 Adjusting the height of the headrest
• See fig. 010510010.
The height adjustment can be done as follows:
• Loosen the wing nut (A) a few turns.
• Slide the headrest (B) to the desired height.
• Securely tighten the wing nut again so that the
headrest cannot shift.
XXXXXX-010510010.en.doc
2.8.2 Adjusting the depth of the headrest
• See fig. 010510020.
The depth adjustment should be done as follows:
• Loosen the two bolts (A) a bit with a spanner with a
key width of 10 mm.
• Set the desired headrest depth (B).
• Tighten the two bolts securely again.
XXXXXX-010510020.en.doc
2.8.3 Adjusting the angle of the headrest
• See fig. 010510030.
The adjustment of the angle should be done as follows:
• Loosen the bolt (A) a bit with a spanner with a key
width of 10 mm.
• Set the desired angle (B).
• Tighten the bolt securely again.
XXXXXX-010510030.en.doc
A
B
010510010
B
A
010510020
B
A
010510030